GA Single turbo 2jz-gte swapped GS300 FS/FT Atlanta
10-31-10, 09:39 PM
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2008
Location: GA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Single turbo 2jz-gte swapped GS300 FS/FT Atlanta
SOLD!
- Engine: Twin Turbo Aristo (2jz-gte) swap with single turbo upgrade
- Interior: Tan leather
- Exterior: All black
- Stereo & Nav: Stock stereo
- Suspension: cut springs (ride is not what you think-rides pretty good)
The Good: Twin Turbo Aristo swap from J-hot Imports
BRAND NEW single T61 turbo kit w/ FMIC
Head recently resurfaced during turbo install and new valve seals installed with ARP head studs
SAFC2
Innovate wideband AFR gauge
3" down pipe/no cat and dual mufflers
Aristo fuel pump
Huge aluminum radiator and tranny cooler
Battery relocated to trunk, Optima Red Top
new timing belt, water pump, serp belt, thermostat, and plugs, upper and lower radiator hoses, new alternator
Crystal clear headlights with amber corners removed (painted housings black)
JDM window vent visors
16" electric fan
17x8 Mustang Bullitt style wheels
I'm sure im forgetting some things here...
Yes, this still has A/C, heat, and PS
The Bad: Could use some fresh paint-but looks good for 15 year old car
Common Lexus probs- cluster needles burnt out, front seats need new leather, sunroof inop, needs trunk and hood struts
I will post up some more pics after i get it cleaned up better.
Can also include my 03 GSXR 1000 for the right trade. Full Yoshi exhaust, frame sliders, smoke windscreen, New Michelin Pilot Power tires
- Engine: Twin Turbo Aristo (2jz-gte) swap with single turbo upgrade
- Interior: Tan leather
- Exterior: All black
- Stereo & Nav: Stock stereo
- Suspension: cut springs (ride is not what you think-rides pretty good)
The Good: Twin Turbo Aristo swap from J-hot Imports
BRAND NEW single T61 turbo kit w/ FMIC
Head recently resurfaced during turbo install and new valve seals installed with ARP head studs
SAFC2
Innovate wideband AFR gauge
3" down pipe/no cat and dual mufflers
Aristo fuel pump
Huge aluminum radiator and tranny cooler
Battery relocated to trunk, Optima Red Top
new timing belt, water pump, serp belt, thermostat, and plugs, upper and lower radiator hoses, new alternator
Crystal clear headlights with amber corners removed (painted housings black)
JDM window vent visors
16" electric fan
17x8 Mustang Bullitt style wheels
I'm sure im forgetting some things here...
Yes, this still has A/C, heat, and PS
The Bad: Could use some fresh paint-but looks good for 15 year old car
Common Lexus probs- cluster needles burnt out, front seats need new leather, sunroof inop, needs trunk and hood struts
I will post up some more pics after i get it cleaned up better.
Can also include my 03 GSXR 1000 for the right trade. Full Yoshi exhaust, frame sliders, smoke windscreen, New Michelin Pilot Power tires
Last edited by usmcpi; 04-14-12 at 10:21 PM.
11-04-10, 09:05 AM
#5
There are differences between a "real turbo" and an ebay turbo. Big differences. I can't say ive never owned an ebay turbo, but yes-there are differences in the metals and materials used to make "real-name brand turbo."
On the car for sale part-I'm sorry, I mistook your car for a different car, with the same exact setup-just needed to be finished. But this is the car. Its got almost the same extact setup your car does-just wasnt finished. Just want to see what you are realistically asking for the car, I want to get into a GS again, but I thought I would let you know you were high on your price. Ill go ahead and edit my last post...
https://www.clublexus.com/forums/lex...e-project.html
On the car for sale part-I'm sorry, I mistook your car for a different car, with the same exact setup-just needed to be finished. But this is the car. Its got almost the same extact setup your car does-just wasnt finished. Just want to see what you are realistically asking for the car, I want to get into a GS again, but I thought I would let you know you were high on your price. Ill go ahead and edit my last post...
https://www.clublexus.com/forums/lex...e-project.html
Trending Topics
11-04-10, 03:51 PM
#10
Driver School Candidate
Thread Starter
Join Date: Jun 2008
Location: GA
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
haha, thanks. I got the idea after i saw someone using some 03/04 Cobra wheels. I was going to get some but i got an awesome deal on these and almost anything would be better than the mismatched supra/300zx wheels i had on it. The rear lean in a bit, im assuming from the cut springs. A 1/4" spacer or so would make them pretty flush. And its a good thing its only a 3.2mp cam or you would see the center caps still say Ford. If it doesnt sell/get traded im gonna paint the "spokes" black.
Last edited by usmcpi; 11-04-10 at 04:09 PM.
12-05-10, 08:59 PM
#15
Driver School Candidate
iTrader: (5)
Join Date: Dec 2010
Location: Ca
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
how about....
1974 Toyota Corona Mark 2 coupe Turbo (location Denver)
Mods include:
7MGTE (stock boost)
255 walbro external fuel pump
Custom Intercooler set up
W58 5spd
Centerforce clutch
Greddy BOV
3inch Downpipe
3inch Exhaust
External oil cooler w/ remote oil filter.
Slightly uprated front and rear springs (has 5 link solid axle rear).
1974 Toyota Corona Mark 2 coupe Turbo (location Denver)
Mods include:
7MGTE (stock boost)
255 walbro external fuel pump
Custom Intercooler set up
W58 5spd
Centerforce clutch
Greddy BOV
3inch Downpipe
3inch Exhaust
External oil cooler w/ remote oil filter.
Slightly uprated front and rear springs (has 5 link solid axle rear).