Eclipse AVN5500 + 4 more tv's wiring question
 

I just bought an IS300 with 4 tv's and an Eclipse 5500 in it. The tv's aren't working so I am gutting the car and re-wiring it. Can you tell me what to do with the parking and reverse wires on the TV's please?

These are just generic tv's so they aren't too complicated, but I don't know much about these setups. Also, if I need it as well..... I need to know how to bypass the dvd while car is in motion thing as well (perfectly legal, read on). I have to wire the rear tv's for my passengers, but I'm probably just going to remove the front one's for some stock visors. They are kind of annoying. I just got the car a few hours ago.

Here's a pic of the set up for reference. :)


http://i32.photobucket.com/albums/d5...G_9818copy.jpg

If it's using the video out on the Eclipse to feed a splitter, you shouldn't need to override the DVD lock. It will play only to the vid out.

As for the parking/reverse wires, not sure what brand it is and that may help. If there isn't a camera for backing up, there should be no need to hook it up to anything.

Big Mack

Thanks. :)

I have everything tonight after spending the day in the car working on it, but I still need to find the Vehicle Speed Pulse Signal wire on the IS300 so I can hook up the navi.... any clues guys? :)

i can get you the wiring diagram from work and post it up what year is the is. on the avn's i dont believe you need to do a bypass of anysort besides ground the ebrake wire. sometimes you need to put a toggle switch on it, depending on the model. Some indashes if they sense a ground signal while the indash is turning on it will know you are trying to trick the system, if you put a toggle switch on it hooked up to ground and flick the switch after the indash loads it will simulate a ebrake type signal being sent. if you need some more info or tech stuff we can take this to pm's if you want

also for some reason if you cant get vid to work thru dvd/av1/av2 input you can use rear camera input hooked up to an ipod/external video source and have a switched on the rev. signal input wire goign to 12v and it will simulate a rear camera input.

Thanks guys :), I've been inside the car for 3 days re-wiring it and doing everything I needed to do to get it all correct. I just need to figure out what wire on the IS300 to hook the purple/white wire from the AVN. That's the speed wire for the navi.

(2002)


http://i32.photobucket.com/albums/d5...G_9875copy.jpg

2002 Lexus IS 300





Remote Start, Security, Keyless Entry, Accessories



Item Wire Color Polarity Wire Location

12 Volts white & white/red + ignition harness

Second 12 Volts

Starter black/white + ignition harness

Second Starter

Ignition black/red + ignition harness

Second Ignition blue/red + ignition harness

Third Ignition

Accessory red + ignition harness

Second Accessory

Third Accessory

Keysense black/yellow - ignition harness

Data Bus grn/blk (data), purple (clock), pink/blk (synchro) data Immobilizer Module

Can Bus High N/A

Can Bus Low N/A

Can Bus Sw yellow/red (door lock data) data L side of driv fuse box, 12 pin plug

Power Lock see Tech Doc 1070

Power Unlock

Lock Motor green/yellow body ECU

Driver Unlock Motor blue/black body ECU

Passenger Unlock Motor red/white body ECU

Parking Lights (-) red headlight switch

Parking Lights (+) green driver kick, harness to rear

Hazards

Turn Signal (Left)

Turn Signal (Right)

Headlight red/blue - headlight switch

AutoLights

Reverse Light red/black + driver fuse box, bottom, 13 pin plug

Left Front Door Trigger - body ECU

Right Front Door Trigger

Left Rear Door Trigger

Right Rear Door Trigger


Remote Start, Security, Keyless Entry, Accessories (Continued)



Item Wire Color Polarity Wire Location

Dome Supervision use door trigger

Trunk/Hatch Pin red/yellow - driver kick, harness to rear

Rear Glass Pin

Hood Pin blue - alarm module

Trunk/Hatch Release blue/white 5wi body ECU

Trunk Release Motor

Fuel Door Release

Power Sliding Door (Left)

Power Sliding Door (Right)

Factory Alarm Arm arms with lock

Factory Alarm Disarm disarms with unlock

Disarm No Unlock use key sense wire

Trunk Alarm Shunt

Tachometer black igniter

Wait to Start

Neutral Safety

Clutch Pedal

Fuel Pump

Rear Defroster

Mirror Defroster

Left Front Heated Seat

Right Front Heated Seat

Speed Sense red/yellow abs and traction ECU

Brake Wire green/white + brake pedal switch

Parking Brake

Horn Trigger green/white - steering column

Wipers blu/blk(L),blu/red(H + steering column

Left Front Window (Up/Down) red - green A driver window switch

Right Front Window (Up/Down) red - green A RF window switch

Left Rear Window (Up/Down) red - green A LR window switch

Right Rear Window (Up/Down) red - green A RR window switch

Sun Roof (Open/Close) not recommended

Sun Roof (Limit/Close)

Memory Seat 1

Memory Seat 2

Memory Seat 3


Audio



Item Wire Color Polarity Wire Location

Radio 12V blue/yellow + radio

Radio Ground brown - radio

Radio Ignition gray + radio

Radio Illumination green + radio

Factory Amp Turn-on

Power Antenna

Left Front Speaker (+/-) pink - purple amplifier

Right Front Speaker (+/-) lt. green - blue amplifier

Left Rear Speaker (+/-) black - yellow amplifier

Right Rear Speaker (+/-) red - white amplifier

Center Channel (+/-)

Subwoofer (+/-)

Aux. Audio Input Left (+/-)

Aux. Audio Input Right (+/-)

RSE Video (+/-)

RSE Audio Left (+/-)

RSE Audio Right (+/-)

Satellite Radio 12 Volts

Satellite Radio Ground

Satellite Radio Ignition

Satellite Radio Antenna

Satellite Audio Left (+/-)

Satellite Audio Right (+/-)


What Fits



Item Size Depth Location

Headunit

Left Front Speaker

Left Front Tweeter

Right Front Speaker

Right Front Tweeter

Left Rear Speaker

Left Rear Tweeter

Right Rear Speaker

Right Rear Tweeter

Center Channel

Subwoofer

Left Front Headrest

Right Front Headrest

Left Rear Headrest

Right Rear Headrest

Satellite Radio Tuner



Wiring Notes: Keysense


Notes:


Using the status output wire from the remote start to trigger this wire will disarm the factory alarm without unlocking the doors.




Wiring Notes: Data Bus


Notes:


The Immobilizer Module is around the ignition key switch. The immobilizer ignition wire is black/red and the ground reference wire is white/black.




Wiring Notes: Lock Motor


Notes:


The body ECU is attach to the top of the fusebox.




Wiring Notes: Driver Unlock Motor


Notes:


The body ECU is attach to the top of the fusebox.




Wiring Notes: Passenger Unlock Motor


Notes:


The body ECU is attach to the top of the fusebox.




Wiring Notes: Left Front Door Trigger


Notes:


The body ECU is attach to the top of the fusebox. The driver door trigger is red/green, front passenger door is red/black, rear doors is red/blue.





Wiring Notes: Hood Pin


Notes:


The alarm module is above the driver kick panel.




Wiring Notes: Trunk/Hatch Release


Notes:


The body ECU is attach to the top of the fusebox.




Wiring Notes: Tachometer


Notes:


The igniter is on the driver side strut tower.




Wiring Notes: Speed Sense


Notes:


The ABS and traction ECU is above the driver kick panel.




Wiring Notes: Left Front Speaker (+/-)


Notes:


The amplifier is above the passenger kick panel. The left rear woofer wires are black/white - yellow/red. The right rear woofer wires are red/white - white/blue.




Wiring Notes: Right Front Speaker (+/-)


Notes:


The amplifier is above the passenger kick panel. The left rear woofer wires are black/white - yellow/red. The right rear woofer wires are red/white - white/blue.





Wiring Notes: Left Rear Speaker (+/-)


Notes:


The amplifier is above the passenger kick panel. The left rear woofer wires are black/white - yellow/red. The right rear woofer wires are red/white - white/blue.




Wiring Notes: Right Rear Speaker (+/-)


Notes:


The amplifier is above the passenger kick panel. The left rear woofer wires are black/white - yellow/red. The right rear woofer wires are red/white - white/blue.

sorry trying to post from work is epic fail this is a diagram from directechs, if you couldnt find it in the posting its.

Speed Sense red/yellow abs and traction ECU

Thank you my friend, got a location on that? Looks like *somewhere* in the drivers kick panel perhaps. I'd hate to grab the wrong plug.

The ECU should be up above the kick mounted on the body with the plug on the firewall side facing down at an angle. You're looking for the red wire with the yellow stripe.

Big Mack

"The ABS and traction ECU is above the driver kick panel." u should be able to meter the wire if you are that worried about grabbing the wrong wire. the indash is not sending a signal out to the wire just recieving and you could always put a diode on it. you can meter it by jacking up the rear put it on stands ptut he car in low/first and u can meter the wire. i forgot if speedo is on ac or dc voltage tho.

OK guys, much appreciated. I'll be doing this soon when I pull the climate to rebulb it. Will update you on the progress :)

Thanks again! :)

You know when I first heard the location and color
I thought "Too easy, what will screw this up?"

Yep....... I thought so.......... G'damnit.



http://www.grabup.com/uploads/eeb0f3...03a.png?direct

Looking at that pic, it should be the one in the upper RH corner, IIRC. Strip a bit back (not cut) and poke the wire through. If it works like it should, make a proper connection. If not, wrap the wire back up and do the upper LH corner. I'm pretty sure it's the RH one, though.

Big Mack

PS: what are you using to display the pic? I like the layout of that.

hahah epic fail, umm lemme see if i can get a pinout. worst case jack up the rear put the rear on stands and put it in 1st and let the wheels roll and u should get a reading on ur meter. but ya strip back, poke a hole thru the strands of wire. put wire thru wrap aroud tape/ziptie to relieve stress or u can solder and tape

it's a Mac, Mack.