gerill2p

iTrader: (1)

^^^^no, that will sink^^^^

DeanIS

Will this setup work on my 2010 IS250 AWD?
18x8 ET41 18x9 ET45?
What tire setup will i need to run?

thank you

ldc

Guess these wheels. 18x8, +30mm allround, 225/45 (F) 245/45 (R). They are flush!!!

Car has a 1.1" drop. Slight rubbing at the front, slight bottoming out on the rear over high bumps.

ISMELLRICE

350z wheels

projectdna

iTrader: (56)

you're rubbing at the front and bottoming out on the rears because you're running the wrong tire sizes.

ldc

The tires comes with the wheels. From what you're saying I should change them to 225/40 and 255/40? I'm sure 255/40 would rob the fenders.

jcheng

Going to be running a set of NT03s from my old EVO. The setup is 18x9.5 +40 all around.

I do not plan lowering the car because of the horrible road conditions and my driveway has a very weird curb so it's not worth the trouble.

So my question is, would running 225/40 or even 235/40 cause any rubbing issues or any modifications needed?

dannyboy26

iTrader: (11)

Those are pretty sick, whats your offset for the Rear? and how low did you go?

leadfoot83

iTrader: (3)

My car on five axis s5 wheels 18x8 +30 all around

leadfoot83

iTrader: (3)

dannyboy26

iTrader: (11)

Here are my new Lorenzo wheels they actually came out nicer than I thought, was thinking of maybe adding a spacer to make them +35 offset, what do you guys think? next is lowering 1.5"

HAiS250

iTrader: (10)

anyone running 9.5 with +22? what tire size do you have?

Uda880

iTrader: (7)

Decided to swap from low profile 19s to 18s to drive on LA roads. The stretched tires looked cool, but the potholes were a bit too much.

Then:
F: 19 x 8.5 et35, R: 19 x 9.5 et42
Tires: F: 235/35/19, R: 275/30/19


Now
F: 18 x 8.5 et35, R: 18 x 9.5 et34
Tires: F: 235/40/18, R: 275/35/18



Will get better pics as time/location allow.

dubUang

After a wash and wax, Volk GT-V's

RyanIS

iTrader: (2)

18 in CCW LM5