this man speaks truth!

Those last 2 pics look mean. Do you know how much you are lowered? I am interested in a square 9.5 et 38 setup of RPF1s for track use, but I am not interested in resolving rubbing issues unless it’s just front liner issues. What did you do to resolve the rubbing? Your input is appreciated.

I don’t see how you could clear a 30, but I’m not certain. I’m running 40 offset 9s right now with little clearance in the rear at full compression, but I’m also running very wide 275s. Maybe the 254s will give you enough room since they will be stretched. You made need a little trimming or rolling to fit. I could be wrong.

I am at about a finger gap. The fronts I had to replace one of the bolts to a flat top that holds the liner(otherwise it was digging into the tire on bumps). I also had to trim and push some of the liner in the front. I still rub a bit on full lock on the front, but that’s really only an issue when reversing as it gets a touch louder, and is due to the way the vents are shaped in the liner. The rear doesn’t rub at my height unless I have 3 passengers. They are also rolled from a previous 19” setup I had. Overall, it’s a very nice setup for daily driving and the few times I’ve autoxed.

They are actually just the oem 08’s with a smoked vinyl overlay with light cutouts. A local friend with a shop did it and he works on many cars. Very similar to bluebatmobile but with better vinyl quality. Distinct Wraps in Gaithersburg MD if you’re interested, he can probably ship.

Sorry to bring up an old thread, but has there been any additional members running 18’s? I’m tryinf to determine my tire sizes as I just got new 18” 57dr’s like the OP.

I prefer to run a square setup on tires, but looking for the widest tires.

^ thank you for the reply. I’m actually on vossen cv3’s in 20” at the moment and rolled my fenders previously so I should be good then, thanks!

Sorry, what series? Like 275/30 or 275/35?