Looks what Santa is bringing.
The following users liked this post:
tas02 (01-05-18)
#19
Tech Info Resource
iTrader: (2)
Are you replacing the glass with lexan?
#24
Correct they had to grind out the welds. Not sure what they are using but is better then the 3M 08115 that I recommend. Iv never monitered the tranny or oil temps other then with the oem lights. I added an oil cooler last season but never had an issue. The tranny has a temp light but I never had it come on and have run 60 minute hot track sessions no issue.
Remember Lexus ran these cars at 24hr races and the only failure or issue was a split CV joint boot.
Remember Lexus ran these cars at 24hr races and the only failure or issue was a split CV joint boot.
The following users liked this post:
isfvss (01-06-18)
#25
Fantastic thread...thank you! So, you think this will really be 125 pounds of total weight reduction when all is said and done? I was happy with the 100 pound figure previously quoted, and it might be more?
#27
Intermediate
iTrader: (2)
The cost of admission is very high, but if it's really more like 125lbs removed, the $40ish/lb is par w/other weight mods besides the "easy" weight-only stuff like LiFePo battery ($6/lb) and flow-forged wheels ($20/lb)... Plus, the impact to vertical moment/CG is incredible.
The following 2 users liked this post by Gearbangin:
cremaster (01-10-18),
MileHIFcar (01-09-18)