nks979

I remember hearing the starter is between the header and the motor and the headers must come off to replace it, I'm also a bit curious about his question, I can't smell exhaust fumes from mine yet but the noise has gotten a bit annoying.

blackisF08

iTrader: (2)

i couldn't smell exhaust fumes on mine either but the noise got louder over the year i owned the car, i couldn't handle the noise anymore even with my joe z exhaust on so i took it in to get it fixed with my warranty.

nks979

I can only hear it at idle really with my exhaust, it will eventually get PPEs but not until I see a power loss or exhaust smell. Seems like some have put some serious miles on the cracked headers without any issues.

PiusGS

iTrader: (1)

Local shop pulled this off my 2009 isf. Solved the rattle noise and installed some ppe headers!

PiusGS

iTrader: (1)

Also people with the Joe Z pts exhaust. Can you chime in and tell me if anyone has had a leak due to a pin hole by the welds?

isfdude

iTrader: (11)

Breathing in exhaust fumes is a really bad thing and people can either pass out or die if driving long enough. This should be a recall and we should start a class action because it seems that most Lexus ISF cars have the same or similar cracks in the exhaust..

ISF350

So this is the case happen to my car that I have posted the question. The exhaust gas smell very strong with CO which is extremely dangerous like poison gas in the cabin. I have to open the windows in order to breath ! it's that serious man. My car already passed the warranty at 99k miles now. I don't know if Lexus can cover this issue?

Lmood

iTrader: (3)

I just had headers installed. I will post pics up of my exhaust manifolds when I get home. Mine were definitely cracked.

Lmood

iTrader: (3)

both my drivers and passengers were cracked.

jdmSW20

iTrader: (12)

Same on the 3SGTE as well, my mr2 developed an exhaust manifold leak but its common on that motor too. Same spot every single time, so it has to be a Toyota thing on their performance based motors. Because I've had to do a new manifold gasket 2x on my mr2 since owning it for 8 years.

ISF350

What is the approx. cost to repair the manifold with welding or cost to replace a new one ?

SoulFreak

iTrader: (1)

If I'm not mistaken a set of OEM headers from the dealership will run more than aftermarket headers. At that point you're just better off going aftermarket. As they're obviously made better and provide more power. Also, removing and installing headers is quite the task. Something you want to do only once, which is why most don't even bother repairing the stock units.

Manh3

iTrader: (1)

I should have a set of 2012 manifolds coming off my car soon if you want them for a fair price. Most of the cracks I'm noticing are from 08-09 ISF's.

F Monster

I have a 2012 and also had cracking issues on my stock manifolds. My solution? Replace them with PPE headers. One of my favorite mod to date.

mikersoft

iTrader: (1)

My 2012 may have developed this issue as well.. After a cool overnight last week, I heard some ticking after starting that went away once the engine warmed up.. If so, it's good timing. I'm scheduled to have PPE headers installed in just over 2 weeks

-Mike