When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Anyone know if the cross brace bolts are long enough to add washers yo use then as spacers? My midpipe and brace caused clearance issues and the shop reinstalled it multiple times by having it loose and tightening/adjusting as best as possible. Never got it to fit right and have been driving without the center brace.
Picture below for reference on which bar. (Not my vehicle)
Anyone know if the cross brace bolts are long enough to add washers yo use then as spacers? My midpipe and brace caused clearance issues and the shop reinstalled it multiple times by having it loose and tightening/adjusting as best as possible. Never got it to fit right and have been driving without the center brace.
Picture below for reference on which bar. (Not my vehicle)
I'd get longer bolts, you'd be giving up a lot of threads. I used 1/2" spacers and got 30mm long bolts which resulted in about the same about of usable threads as the stock bolts.
I'd get longer bolts, you'd be giving up a lot of threads. I used 1/2" spacers and got 30mm long bolts which resulted in about the same about of usable threads as the stock bolts.
Nice. Care to share which spacers you got and does it clear to where you can still have the air panels installed?
Nice. Care to share which spacers you got and does it clear to where you can still have the air panels installed?
I used these. If the link stops working, they're called "3/8 in. x 1/2 in. Steel Spacers in Chrome (2-Piece/Pack)" from Home Depot. The panel fits tighter with the spacers but I didn't have a problem getting it back on.
08-02-21, 11:03 PM
