Joe Z carbon fiber exhaust tips done??
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2011
Location: TN
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Joe Z carbon fiber exhaust tips done??
So I really wanted to get some of the carbon exhaust tips from Joe Z for my Starfire Pearl and I called Carson Toyota today and they said they were finished and out of production. Am I missing something? Anybody know any particular reason why production might have halted?
#2
I asked Joe about the exhaust tips via PM a week or so ago and he told me the below....
We have had some issues with members racing with the tips and long term high heat conditions..
So we have currently stopped sales to work on the issue with our manufacture.
Not too sure when or if we will begin sales again.
Regards,
~ Joe Z
We have had some issues with members racing with the tips and long term high heat conditions..
So we have currently stopped sales to work on the issue with our manufacture.
Not too sure when or if we will begin sales again.
Regards,
~ Joe Z
#3
Lead Lap
iTrader: (1)
I asked Joe about the exhaust tips via PM a week or so ago and he told me the below....
We have had some issues with members racing with the tips and long term high heat conditions..
So we have currently stopped sales to work on the issue with our manufacture.
Not too sure when or if we will begin sales again.
Regards,
~ Joe Z
We have had some issues with members racing with the tips and long term high heat conditions..
So we have currently stopped sales to work on the issue with our manufacture.
Not too sure when or if we will begin sales again.
Regards,
~ Joe Z
#4
Trending Topics
#8
i saw the pic n yea they were deff. melted lol..........p.s. if and when u decide to go back to pocono let me kno as im in west chester n would love to meet up n track my f as well
#12
Lexus Fanatic
I can imagine them melting. I burned my hand on the trunk floor just trying to put my spare back in right after a 20 min session. It hurt like hell and I could not believe it heated it up to that point!. I am sure it would toast
#14
Sponsor
iTrader: (1)
You cant just mount carbon/epoxy tip covers to metal... you need a phenolic type insulating layer in between, or they will melt and/or crack. The right way to make them is to oversize them a bit, then insert them over an insulating sleeve.
Rafi
Rafi
__________________
We Engineer Track Proven Upgrades For Your Lexus!
SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
SUPERCHARGERS : ECU TUNING : SUSPENSION : EXHAUST : PPE MASTER DEALER
#15
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,446
Received 1,058 Likes
on
586 Posts
We made a couple hundred.. Most of the street driven ones aren't having or didn't have any problems even after a couple of years.
We discontinued them mainly because they were melting after track days..
Thanks again !!
Joe Z