When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You have to be very careful when choosing a 17 because they won't all fit. I don't think the 17 inch Weld will fit due to it being a welded two piece wheel. The face is physically smaller due to the stepped lip so I am almost certain it won't clear. I tried these Evo VIII 17's on a couple days ago and they work with about 3mm of clearance due to not having a crazy drop center like the Welds have.
how do these look on the car... I have a set aswell since I also have a evo8
Got some 245/45/17 Hoosiers DR2's and mounted them on a 17x8+35 Rota Boost. Even though the wheel itself weighted almost 4 lbs more than my 18x9.5 TE37's the tire was much lighter than my 285's so the combo still came out to 4.4 lbs lighter per wheel/tire. FWIW these 245 Hoosiers are only an inch narrower than my 285 Advan A048's.
^ ^ ^
Very nice, I'm interested to see what this does for your 60ft and ET, please post when you have results... I actually think it looks pretty good too.
^ ^ ^
Very nice, I'm interested to see what this does for your 60ft and ET, please post when you have results... I actually think it looks pretty good too.
I will for sure be going to the track Friday but I have to make a decision. I can go to the 1/8th or I can go to the 1/4 mile. The issue is that the 1/4 mile is doing a no prep test N tune night. I just don't know if there's any point in going to that if they aren't putting down any VHT. I REALLY want a 1/4 mile number though.
I will for sure be going to the track Friday but I have to make a decision. I can go to the 1/8th or I can go to the 1/4 mile. The issue is that the 1/4 mile is doing a no prep test N tune night. I just don't know if there's any point in going to that if they aren't putting down any VHT. I REALLY want a 1/4 mile number though.
quarter. Car pulls harder on the last 1/8 then it does the first. People pull me in the first half and I will start to run them down on the second half
Am looking to get a set-up for the rear. While I'm sure my 19's would be sufficient, 18 or even 17 is preferred (while keeping 26" diameter). Sadly, I only can make it to a few race weekends per year, so I'm trying to keep costs down as far as rims go.
As far as 18"x8.5 go, will a 48 offset work? I'd be running 245/40/18 M&H
And as far as 17"x8, will a 45 offset work? I'd be running 245/45/17 M&H
Any issues with these? Any better ideas? I tried to fit my 16" Supra drag set-up on....but no go!!
Am looking to get a set-up for the rear. While I'm sure my 19's would be sufficient, 18 or even 17 is preferred (while keeping 26" diameter). Sadly, I only can make it to a few race weekends per year, so I'm trying to keep costs down as far as rims go.
As far as 18"x8.5 go, will a 48 offset work? I'd be running 245/40/18 M&H
And as far as 17"x8, will a 45 offset work? I'd be running 245/45/17 M&H
Any issues with these? Any better ideas? I tried to fit my 16" Supra drag set-up on....but no go!!
48 will work on the 18 but go +35 on the 17x8. That’s what mine are with no issue
03-29-19, 08:15 AM
