JosephH

Hi, can anyone help locate the part# for this LCA 22mm socket bolt? I can't find "FIG 51-02 (PNC 51296). Circled red in the picture. Lexus 2009 ISF.
I know it's not part#90105-16053, this is too short, bolt is about 5~6cm long.
Thanks.

lobuxracer

iTrader: (2)

90119-16013 is the part number for the big bolt.

JosephH

Thanks lobuxracer, This looks like the correct one I'm looking for, Cheers.

ISFslow

Do you know the thread pitch on this? I had an issue with mine stripping out and need to repair the hole.

CSpecISF

Best bet may be to order up a new bolt and check the pitch on that with a thread gauge. I assume you're going for a Helicoil.

ISFslow

Yea that was my thoughts on it. The passenger side is fine but, during my LCA bushing upgrade, I botched the driver’s side and didn’t realise it. 🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️

Breck569

I’m having the exact same issue on my driver side and bolt is now slightly stripped. Was changing my LCA bushings also to the RR ones. Going to have to order a bolt and retap the female.

Tried the bolt from the other side and started dulling it’s thread also...
do you happen to remember the thread size? How did tapping go for you?

Stratofort

Re-opening this thread.

Was installing Figs spherical USRS and the 22mm bolt completely seized in the hole as I was trying to bolt on the new USRS. I was able to muscle it out and I ordered 2 replacements (in the event that I have the same issues on the other side). Any tips/recommendations for tapping this hole? I've never had to tap something like this so I'm a bit nervous. I plan to Helicoil it if tapping proves unsuccessful.

Thanks in advance!

ValSal

do you know if this bolt is the same part as a 2017 IS? having the same issue with stripped bolt

lobuxracer

iTrader: (2)

It is not. Not even close. You need 90119-16021.

Rickna

iTrader: (3)

The thread is M16 x 1.5