Hitch Bike Rack?
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2012
Location: CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hitch Bike Rack?
Does anyone knows if is there a bicycle hitch-rack available for the 250/350 convertible?
I'd love to get one. I want to take my bike to the beach, but it won't fit in the trunk.
I'd love to get one. I want to take my bike to the beach, but it won't fit in the trunk.
#2
#3
Racer
iTrader: (7)
Join Date: Jun 2007
Location: California - Bay Area
Posts: 1,305
Likes: 0
Received 3 Likes
on
3 Posts
and too the OP... you probably already know, but the retractable roof most likely can not be operated.
Last edited by ISCjonny; 08-21-12 at 11:38 AM.
#4
#5
Racer
iTrader: (7)
Join Date: Jun 2007
Location: California - Bay Area
Posts: 1,305
Likes: 0
Received 3 Likes
on
3 Posts
is250/is350 sedan share the same exhaust... so im pretty positive that is250c/is350c share the same exhaust as well... it wouldnt be cost effective for lexus to have to develop 2 different exhaust systems for technically the same car.
#6
Driver School Candidate
Thread Starter
Join Date: Aug 2012
Location: CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, Lexus IS250c and IS350c have the same body, and imagine exhaust is the same. In any case if anything varies in the exhaust, it
'll most likely be the inside dimensions, but not the outside.
So ECL, do you have a link to the rack available for the IS250c??
I wrote to a couple of bicycle rack manufacturers and I am waiting on an answer.
'll most likely be the inside dimensions, but not the outside.
So ECL, do you have a link to the rack available for the IS250c??
I wrote to a couple of bicycle rack manufacturers and I am waiting on an answer.
Trending Topics
#9
Racer
I bought an Allen Sports bike rack, model 102DN. This is not a trailer hitch model and it is not made for the convertible IS but it works. There is a stabilizer that is supposed to rest on the bumper id the IS sedan, but on the convertible, it rests on the license plate. I put some rags between the license plate and the trunk lid so it wouldn't cause scratches. I have made several trips to San Antonio which is about 300 miles from me and not had any problems.
#11
Racer
Here are some photos. This model has straps going to the sides for additional sideways stability, but can't be used on the ISC because of the shape of the trunk lid. I did lay them out in the photos, but they will not hold on in reality.
You can also open the trunk with the rack attached but the added weight of the rack is too much for the trunk lid gas struts to hold the lid open. Or maybe I need new gas struts?
You can also open the trunk with the rack attached but the added weight of the rack is too much for the trunk lid gas struts to hold the lid open. Or maybe I need new gas struts?
#13
Racer
I have never tried to raise or lower the top while the bike rack was on, so I don't really know. Ignoring the weight issue, I would think that that with the rack being centered, no problems would happen. But that is just my thinking. To be able to go into the trunk for something is all I was trying to point out.
To me the weight is more of a concern. The rack isn't really that heavy, 7.25 lb according to my bathroom scale, but whether the motors that run the mechanism can handle that, I don't know.
To me the weight is more of a concern. The rack isn't really that heavy, 7.25 lb according to my bathroom scale, but whether the motors that run the mechanism can handle that, I don't know.
#14
Lead Lap
iTrader: (1)
I have never tried to raise or lower the top while the bike rack was on, so I don't really know. Ignoring the weight issue, I would think that that with the rack being centered, no problems would happen. But that is just my thinking. To be able to go into the trunk for something is all I was trying to point out.
To me the weight is more of a concern. The rack isn't really that heavy, 7.25 lb according to my bathroom scale, but whether the motors that run the mechanism can handle that, I don't know.
To me the weight is more of a concern. The rack isn't really that heavy, 7.25 lb according to my bathroom scale, but whether the motors that run the mechanism can handle that, I don't know.
but more like rack+bike on there = having any problems with trunk alignment due to weight and pressure
I am not an engineer - I may be over thinking it
i have a 4 bike rack on another car we use when we ride at the beach
#15
Racer
Sorry, I misunderstood your question. So far I haven't had any problems with alignment. But I don't use the rack that often. I doubt if it has even been a dozen times over the past 3 years..