IS C Discussion about the convertible IS C model

iJDMTOY DRL LED conversion

Thread Tools
 
Search this Thread
 
Old 10-15-23, 10:56 AM
  #1  
imkIS350c
Driver
Thread Starter
 
imkIS350c's Avatar
 
Join Date: Oct 2023
Location: SC
Posts: 63
Likes: 0
Received 7 Likes on 6 Posts
Question iJDMTOY DRL LED conversion

Hey everyone,

I wanted to share my recent experience with the iJDMToy Xenon White 52-SMD 9005 LED High Beam Daytime Running Lights. They come with a decoder and work flawlessly without any flickering. Unfortunately, I had a bit of trouble fitting the decoder into the headlight, so I couldn't put the back lid on.

After completing the project I saw the VLAND LED Headlights. They look awesome. If any of you have experience (initial or long-term) with them, I'd really appreciate hearing your thoughts.

Thanks in advance!


Old 11-09-23, 10:09 AM
  #2  
MikeFig82
Lead Lap
iTrader: (13)
 
MikeFig82's Avatar
 
Join Date: Nov 2013
Location: Texas
Posts: 4,076
Received 768 Likes on 671 Posts
Default

Originally Posted by imkIS350c
Hey everyone,

I wanted to share my recent experience with the iJDMToy Xenon White 52-SMD 9005 LED High Beam Daytime Running Lights. They come with a decoder and work flawlessly without any flickering. Unfortunately, I had a bit of trouble fitting the decoder into the headlight, so I couldn't put the back lid on.

After completing the project I saw the VLAND LED Headlights. They look awesome. If any of you have experience (initial or long-term) with them, I'd really appreciate hearing your thoughts.

Thanks in advance!

When I first got my IS250 in 2016. I ordered these. What I did was take the circuit board out of the case. Then got some 2-3" shrink tubing and covered the board. Shrank the tubing enough to just contour. Leaving the ends open so to dissipate heat.

That being said you can then stuff the board inside the headlight, and seal it back up with the covers.

Old 11-09-23, 11:21 AM
  #3  
imkIS350c
Driver
Thread Starter
 
imkIS350c's Avatar
 
Join Date: Oct 2023
Location: SC
Posts: 63
Likes: 0
Received 7 Likes on 6 Posts
Default

Originally Posted by MikeFig82
When I first got my IS250 in 2016. I ordered these. What I did was take the circuit board out of the case. Then got some 2-3" shrink tubing and covered the board. Shrank the tubing enough to just contour. Leaving the ends open so to dissipate heat.

That being said you can then stuff the board inside the headlight, and seal it back up with the covers.
Thank you very much for the answer. I may try that or just leave it like that.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AndrewT1
HS 250h Model (2010-2012)
33
02-09-23 12:41 PM
Kishanptl1
Lighting
18
05-03-19 02:40 PM
KingLS
LS - 3rd Gen (2001-2006)
4
01-07-15 10:39 AM
L-S-D
IS - 2nd Gen (2006-2013)
27
12-09-09 01:34 PM
jramos8
IS - 2nd Gen (2006-2013)
11
10-26-09 06:32 AM



Quick Reply: iJDMTOY DRL LED conversion



All times are GMT -7. The time now is 08:50 PM.