Invidia axle back + midpipe set up, does this effect O2 sensors?
$1200 for this exhaust + install cost.. just a question though, I know the axleback is after the O2 sensors so that's not the issue but the mid pipe says it deletes the cats.. how does this effect the car? Can a check engine light come of this? Sounds amazing IMO with midpipe |
i have the full exhaust, no lights no issues.
|
You shouldn't have any O2 issues unless downpipe but that is resolved based on what you get.
|
I just changed the midpipe and the axle back (the same parts from Invidia that was from the video) to my IS250. Driving for 130 miles and I have the check engine light turns on. The code diagnostic is P013C which related to the slow response of the O2 sensor. Not sure what to do now :(
|
Originally Posted by babiibryan
(Post 10518346)
I just changed the midpipe and the axle back (the same parts from Invidia that was from the video) to my IS250. Driving for 130 miles and I have the check engine light turns on. The code diagnostic is P013C which related to the slow response of the O2 sensor. Not sure what to do now :(
|
Originally Posted by AtomicAWD
(Post 10518373)
Wait and see if the light goes off, or clear it if you want and see if it returns. Mine came on and went off about 3 times with a similar code, but has not come back for about 3 weeks now.
Look like we share the same problem. It might be from the Invidia parts. |
Originally Posted by babiibryan
(Post 10518395)
It already went off after staying on for 3 hours, but I still diagnose a code P013C by the OBDii. I really want to see if the Invidia midpipe and axle back cause the problem or the O2 sensor itself is bad and cause the problem or the installation causes the leaking problem.
Look like we share the same problem. It might be from the Invidia parts. |
Originally Posted by babiibryan
(Post 10518395)
It already went off after staying on for 3 hours, but I still diagnose a code P013C by the OBDii. I really want to see if the Invidia midpipe and axle back cause the problem or the O2 sensor itself is bad and cause the problem or the installation causes the leaking problem.
Look like we share the same problem. It might be from the Invidia parts. |
Originally Posted by AtomicAWD
(Post 10518421)
Apparently it's not uncommon, at least for the Tsudo, the usual fix being OEM gaskets. I bought them only to find the light hasn't come back on. If it does I'll install them.
|
Originally Posted by ChineseKFC
(Post 10518447)
Most likely I’ll pin it on the gaskets, however I believe the RR racing tune can code it out.
|
Originally Posted by babiibryan
(Post 10518458)
Oh you have Tsudo, not Invidia but you also get the code P013C too. Do you have the part number for the OEM gasket?
|
Originally Posted by babiibryan
(Post 10518459)
I am sorry I am noob. Do you mind to explain what is RR racing tune?
|
Originally Posted by babiibryan
(Post 10518395)
It already went off after staying on for 3 hours, but I still diagnose a code P013C by the OBDii. I really want to see if the Invidia midpipe and axle back cause the problem or the O2 sensor itself is bad and cause the problem or the installation causes the leaking problem.
Look like we share the same problem. It might be from the Invidia parts. |
Invidia
https://cimg8.ibsrv.net/gimg/www.clu...e147c30c8.jpeg
Stock exhaust gasket Ive got those install with the midpipe and cel light is gone. |
All times are GMT -7. The time now is 04:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands