Remote start then shuts off when entering
#1
Lead Lap
Thread Starter
Remote start then shuts off when entering
Anyone have this is that normal? When I start the car with remote as soon as you open door the car shuts off...
The following users liked this post:
Tabai865 (12-16-20)
The following users liked this post:
ttsport15 (02-07-17)
#3
This is normal. I was told by my installed that Toyota/Lexus remote push start uses an encrypted signal that has yet to be cracked by aftermarket devices. This ability is called "secure takeover". I had the same issue on a 2014 Venza, the NX, IS and RX. Bit annoying but at least it's just a button.
The following users liked this post:
ttsport15 (07-11-20)
#5
Lead Lap
Thread Starter
Thank you now who's goin to tell my wife this??
The following 5 users liked this post by ToDesi:
#9
You can thank all the idiots that participated in the class action lawsuit that was against several car makers. A few idiots died because they remote started their vehicle in garages and other enclosed areas.
The following users liked this post:
ttsport15 (07-11-20)
#10
Lead Lap
Thread Starter
probably can group those people with the ones that run generators in their homes
#12
Need the generator to run the hair dryer in the shower, duh...
#13
On a 300C (Chrysler) the key fob start would require you entered the car, put your foot on the brake and "re"pressed the START button. Nice and logical.
I guess the Lexus Enform app serves its purpose, You can start it when you're minutes away (well outside the distance of the fob,) so the car can cool or heat for a reasonable period of time.
I guess the Lexus Enform app serves its purpose, You can start it when you're minutes away (well outside the distance of the fob,) so the car can cool or heat for a reasonable period of time.
Last edited by LeeSoFL; 10-30-18 at 12:46 PM.
#14
On a 300C (Chrysler) the key fob start would require you entered the car, put your foot on the brake and "re"pressed the START button. Nice and logical.
I guess the Lexus Enform app serves its purpose, You can start it when you're minutes away (well outside the distance of the fob,) so the car can cool or heat for a reasonable period of time.
I guess the Lexus Enform app serves its purpose, You can start it when you're minutes away (well outside the distance of the fob,) so the car can cool or heat for a reasonable period of time.
It doesn't work that way for the Lexus. You can remote start the car using the Enform app on the phone, but once you unlock the car and open the door, the engine turns off. While it might be cooler/warmer in the car when you get in, you still have to start the car again which to me defeats the purpose of the remote start. It should function the same way as the Chrysler 300, with the engine still running and all you have to do is depress the brake and hit the Start button to get on your way.
#15
They also told me that you can't have two cars on the same Enform app, but then I spoke with someone at their support, and they merged the two cars onto each of our logons for remote start.
Sometimes you really have to work at getting the answer you want.