Originally Posted by sdotk

Pretty sweet. I kind of want to plasti dip my reflectors black because they seem unnecessary but this would be a great alternative.

Originally Posted by KYLESTONES

I dipped mine

Originally Posted by Passat774

do you have any pictures?

Originally Posted by JustNoize

Hey Guys Long Time Since I posted,

Anyway over the weekend I took on the adventure of Installing these

IJDMTOY.COM Led Reflectors http://store.ijdmtoy.com/Lexus-IS250...s-p/75-419.htm

Well First I Felt That The Red Plastic Was To Bright And Needed To Be smoked.
So I Had them painted at my body shop.



Then I Ordered These Really Cool things From amazon called Posi Taps
No Soldering No Crimping No Cutting , Check out Videos on youtube you will see what i mean.


Then The Install Began


After I finally Found out how to Remove the rear bumper,

You Have to push the lining in and look up with a flashlight you will see like a plastic
tunnel big enough for a socket , i believe it was #10 or #12 loosen than up on both sides,
and your half way off.

the more obvious screws were located, when the trunk is open, on the L and R edge where the trunk meets the bumper underneath a painted to match pop off cover.

and then Boom she pulls off

next you will need to take out the tail lights, so right above the bumper screws near the trunk

you will find two more black plastic pop off covers, remove those to access the two screws using again #10 or #12 socket and then just pull the light , it feels like your going to break it but then boom she comes out.


you do your wiring connections

For the reflector: black is ground, green w/ white tracing is the parking light, red is brake light, white is turn signal. Tail lamp harness: black is ground, red is parking light, green is brake, green with yellow tracing is the turn signal.

Its Wired as follows:
Black to black, green to red, red to green with white tracing, white to green with yellow tracing.

Then ya slap everything back together and boom
here is a video
https://www.instagram.com/p/BFrnpnsOrs-

I love them.

Originally Posted by JustNoize

You'll Have to Feel Around For it in this general area.

Throw some gloves on

Originally Posted by JustNoize

You'll Have to Feel Around For it in this general area.

Throw some gloves on

Originally Posted by jimmyc13

I liked these a while back but decided not to install them. Heard the made in china crap doesn’t last long and they die too quickly. That’s a shame, not an easy swap.

Originally Posted by JustNoize

You'll Have to Feel Around For it in this general area.

Throw some gloves on