IS - 3rd Gen (2014-present) Discussion about the 2014+ model IS models

Need wheel help

Thread Tools
 
Search this Thread
 
Old 04-28-17, 06:54 PM
  #1  
1qwik6
Driver School Candidate
Thread Starter
 
1qwik6's Avatar
 
Join Date: May 2016
Location: SC
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default Need wheel help

I am looking at running a 19x9.5 square setup. What offset should I have these built to and what would the recommend tire size be?
Old 04-28-17, 08:05 PM
  #2  
Sasnuke
Lexus Test Driver
 
Sasnuke's Avatar
 
Join Date: Feb 2017
Location: Richmond Hill, Ontario, Canada
Posts: 6,260
Received 1,732 Likes on 1,368 Posts
Default

Not a lot of folks run a 9.5 square setup, but i believe there are some on the Wheels thread.
Depending what your options are for offset, a +40 or higher (up to +45).
Tire size, 255/30/19 if you're going square.
Typically a 265/30/19 would be used on the rear, but I have a feeling it will be too big for the front, so downsizing to the 255/30/19 is your best bet.
I think at full lock you will likely still rub on the front due to the 9.5 no matter the tire size...but that's at full lock.

Your best to check the Wheel thread and see if anyone has 9.5 in the front.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
47pilot
RC F (2015-present)
17
03-13-17 09:39 AM
slickster9
IS - 3rd Gen (2014-present)
8
05-31-16 12:04 AM
rac2max
IS - 2nd Gen (2006-2013)
15
09-22-08 08:28 PM
NODNARl3
IS - 2nd Gen (2006-2013)
4
07-26-08 10:37 PM
Shinchan
Wheels, Tires & Brakes Forum
7
02-21-05 03:20 PM



Quick Reply: Need wheel help



All times are GMT -7. The time now is 08:13 AM.