07' is250 non-ML amp & speaker swap
#1
Driver School Candidate
Thread Starter
07' is250 non-ML amp & speaker swap
I have a 2007 is250 with factory nav, but not the ML system and am going to replace the factory speakers with the following;
Hertz 163.3 in the doors
JL 12w3 sub
JL RD900/5 amp
JL Fix 86 Line Output Coverter
A few questions, I've seen a few factory amp diagrams, but they show front door woofer and mid wires, no tweeter wires, are any of the speaker outputs coming from the factory amp full range signals to run into the line output converter?
Hertz 163.3 in the doors
JL 12w3 sub
JL RD900/5 amp
JL Fix 86 Line Output Coverter
A few questions, I've seen a few factory amp diagrams, but they show front door woofer and mid wires, no tweeter wires, are any of the speaker outputs coming from the factory amp full range signals to run into the line output converter?
#2
Driver School Candidate
The tweeters don't run active, they run off the signal going to the mids but are passively crossed over.
None of the signals are full range you will need to use a processor to sum the signals from mid and mid bass together.
None of the signals are full range you will need to use a processor to sum the signals from mid and mid bass together.
The following users liked this post:
Twindaddy (10-07-17)
#3
Driver School Candidate
Thread Starter
Thanks for the reply. Looks like the JL Fix86 will take both the woofer and midrange inputs, sum them, and send out a preamp full range signal so it should be good.
Thread
Thread Starter
Forum
Replies
Last Post
Nick217
GS - 3rd Gen (2006-2011)
8
07-29-21 05:19 PM
2Fast0
IS - 2nd Gen (2006-2013)
1
05-07-06 01:27 AM
fast400
Lexus Audio, Video, Security & Electronics
5
04-16-03 10:17 PM