IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

2014 IS250 Fsport engine into 2007 IS250

Thread Tools
 
Search this Thread
 
Old 04-24-17, 04:15 PM
  #1  
07is4GR
Driver School Candidate
Thread Starter
 
07is4GR's Avatar
 
Join Date: Apr 2017
Location: California
Posts: 8
Received 2 Likes on 2 Posts
Default 2014 IS250 Fsport engine into 2007 IS250

Hello everyone, first post here and after much research I have a question I was hoping to get some assistance with. I recently purchased a 2007 IS250 (120,000 miles), and sure enough after almost a year, the dreaded start up rattle. I have sourced an engine out of a 2014 IS250 F sport and want to swap it into my car. Im mechanically capable of doing the job but wanted to run it by the forum to make sure there arent any different or updated sensors, or difference in engine design before I go ahead and order the new engine
Old 04-24-17, 06:31 PM
  #2  
Jeff Lange
Keeping it Real
iTrader: (1)
 
Jeff Lange's Avatar
 
Join Date: Apr 2009
Location: Edmonton, CA
Posts: 5,016
Received 584 Likes on 393 Posts
Default

Everything will be fine.

Jeff
The following users liked this post:
07is4GR (04-24-17)
Old 04-24-17, 07:55 PM
  #3  
suprawhite
Advanced
iTrader: (5)
 
suprawhite's Avatar
 
Join Date: Apr 2004
Location: California (So Cal)
Posts: 602
Received 8 Likes on 8 Posts
Default

Get the IS 350 engine, at least you get 102hp more since you're taking one out for another.
The following users liked this post:
07is4GR (04-24-17)
Old 04-24-17, 09:29 PM
  #4  
07is4GR
Driver School Candidate
Thread Starter
 
07is4GR's Avatar
 
Join Date: Apr 2017
Location: California
Posts: 8
Received 2 Likes on 2 Posts
Default

Awesome, thanks for the quick responses. On a side note, is the 2014 4GR likely to have the start up rattle? I've been trying, with no luck, to find a solid answer about what year they had revised the cam phasers from the factory..
Old 04-24-17, 10:37 PM
  #5  
Jeff Lange
Keeping it Real
iTrader: (1)
 
Jeff Lange's Avatar
 
Join Date: Apr 2009
Location: Edmonton, CA
Posts: 5,016
Received 584 Likes on 393 Posts
Default

The intake cam gears were updated several times, I don't think any models produced after 04/2008 typically experience much trouble. The newest part number available started being used in 07/2012.

The exhaust cam gears were updated in 03/2006 and are still the same, the startup rattle issue is related to the intake cam gears.

In conclusion, any engine you get produced after 04/2008 should be fine. Before that it may or may not have had the gears replaced, so it would be a gamble. I never had any issue with the 4GR in my 2011, though I swapped it out at 60,000 miles for the 2GR, so...

Jeff
Old 04-25-17, 08:48 AM
  #6  
07is4GR
Driver School Candidate
Thread Starter
 
07is4GR's Avatar
 
Join Date: Apr 2017
Location: California
Posts: 8
Received 2 Likes on 2 Posts
Default

Nice, thanks for your help Jeff. I saw your build thread and your car is BOSS 👍👍, much props on your successful 2GR swap.

Now I might consider it on mine if its just a base engine swap and keep my drivetrain as I dont have much patience for the electrical side of things lol
Old 04-27-17, 11:48 AM
  #7  
Gville350
Moderator
iTrader: (10)
 
Gville350's Avatar
 
Join Date: Mar 2011
Location: South Carolina
Posts: 11,568
Likes: 0
Received 430 Likes on 384 Posts
Default

You should be fine like Jeff said. Let us know how the swap goes!

BTW, why the motor swap when it is just the "cam gears" that are causing you concern? Just curious.
Old 04-27-17, 09:55 PM
  #8  
07is4GR
Driver School Candidate
Thread Starter
 
07is4GR's Avatar
 
Join Date: Apr 2017
Location: California
Posts: 8
Received 2 Likes on 2 Posts
Default

Main thing for me is the time. I figured the cam gears and motor swap cost around the same. One upside on swapping the engine is the lower mileage unit I have sourced.
Old 04-28-17, 10:56 AM
  #9  
MikeFig82
Lead Lap
iTrader: (13)
 
MikeFig82's Avatar
 
Join Date: Nov 2013
Location: Texas
Posts: 4,076
Received 767 Likes on 670 Posts
Default

This just popped up in the classifieds. It's JDM though. There might be wiring harness variances.

https://www.clublexus.com/forums/2gen-is250-is350-is-f-classifieds-06-13/854712-brand-new-4gr-long-block-direct-from-japan.html
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Smed
IS - 3rd Gen (2014-present)
19
11-08-17 06:50 PM
JohnLX300
IS - 2nd Gen (2006-2013)
7
06-05-12 12:37 PM
YWW
IS - 2nd Gen (2006-2013)
57
08-10-07 04:40 PM
dsdfan
IS - 2nd Gen (2006-2013)
5
03-22-06 09:57 PM



Quick Reply: 2014 IS250 Fsport engine into 2007 IS250



All times are GMT -7. The time now is 01:13 PM.