ClubLexus - Lexus Forum Discussion

ClubLexus - Lexus Forum Discussion (https://www.clublexus.com/forums/)
-   IS - 2nd Gen (2006-2013) (https://www.clublexus.com/forums/is-2nd-gen-2006-2013-163/)
-   -   Engine Rattle (https://www.clublexus.com/forums/is-2nd-gen-2006-2013/826100-engine-rattle.html)

4sythe 06-16-16 02:06 PM

Engine Rattle
 
So ive had the camgear rattle for sometime now, that i randomly hear from week to week, but now i am hearing a similar sound while im driving between 2000 and 4000 rpm during acceleration, not sure if its related but the sound is similar to the cam gear rattle just slightly louder. Has anyone experienced anything similar?

kickin8 06-16-16 02:19 PM

which one do you have ? 250 or 350?

4sythe 06-16-16 05:00 PM


Originally Posted by kickin8 (Post 9523056)
which one do you have ? 250 or 350?

I have a 2006 is250.

jjc250 06-16-16 06:58 PM

Record it and put it here. May be the water pump

RandyIS250 06-17-16 08:31 PM

water pump idling and tensioner pulley, tensioner makes the most noise i gotta replace mine as well, **** dealership costs 400$ canadian dollars, aftermarket won't fit, dealer sells the whole assembly they won't sell pulley alone.

If you're talking about Tick and Tap noises, that's normal from direct injector that i heard from other members on here. go change your fluids. trans/diff cases and use Mobile 1 synthetic oil for smooth engine.

4sythe 06-18-16 09:36 AM


Originally Posted by RandyIS250 (Post 9524491)
water pump idling and tensioner pulley, tensioner makes the most noise i gotta replace mine as well, **** dealership costs 400$ canadian dollars, aftermarket won't fit, dealer sells the whole assembly they won't sell pulley alone.

If you're talking about Tick and Tap noises, that's normal from direct injector that i heard from other members on here. go change your fluids. trans/diff cases and use Mobile 1 synthetic oil for smooth engine.

Its not the taping noise from the injectors, its a lot louder than that and only present between 2000-4000 rpm. Took a video but the sound isnt coming through good on the camera. Sound likes a louder cam gear clickingng.

RandyIS250 06-18-16 08:34 PM


Originally Posted by 4sythe (Post 9524815)
Its not the taping noise from the injectors, its a lot louder than that and only present between 2000-4000 rpm. Took a video but the sound isnt coming through good on the camera. Sound likes a louder cam gear clickingng.

there a post about camshaft and piston ring for our IS250 somewhere people having that noise too, like i said tensioner pulley and water pump makes the most noise in engine component.

firelikeiy 08-30-16 12:15 AM

Hi, it may be premature for me to say this but I also have had the cam gear rattle on my 2008 IS250. Recently a coworker gave me a quart of Marvel Mystery Oil that he found in his garage. That stuff is pretty old school but during my last oil change I decided to throw it in. I wasn't expecting it to really do anything and just added it because I had it, but, coincidentally, I've noticed that my cam gear rattle has seem to disappear. It is usually worse during the fall and spring for me so time will tell if this is a real solution but so far I have a couple thousand miles and have not heard my cam gears rattle once. I'm going to be really shock if this fixes it as I have ran Mobil 1 synthetic motor oil since the car was new and have stuck to the 5k mile oil change interval but figure I have enough miles to recommend others give it a shot. Just for background info, my car has 115K miles on it.

Also, check your water pump... if it is occurring between 2-4k rpm then that might be the culprit.

Gville350 08-30-16 01:21 PM

Are you sure this noise is coming from under the hood? Could it be a rattle from a damaged/loose heat shield on the exhaust?

4sythe 08-30-16 03:15 PM


Originally Posted by Gville350 (Post 9602692)
Are you sure this noise is coming from under the hood? Could it be a rattle from a damaged/loose heat shield on the exhaust?

Definitely not the heat shield, I am going to do an oil change weekend a determine if its coming from the cam gear. After that the next step will be to change the water pump.

4sythe 02-11-17 09:06 AM

So ive done the oil change and many miles later im not sure what the problem is, its hard to diagnose as the sound is only made while driving. So if i put the car in park and rev the engine, guess what, no noise. but once driving i will hear it only between 2k and about 4k rpm. Wouldn't the water pump and tensioners still make noise in park. Thinking cam gear now as this might be the cam gear clicking during the point when it tries to adjust the timing.

Leederosa 08-05-21 10:29 AM


Originally Posted by 4sythe (Post 9767732)
So ive done the oil change and many miles later im not sure what the problem is, its hard to diagnose as the sound is only made while driving. So if i put the car in park and rev the engine, guess what, no noise. but once driving i will hear it only between 2k and about 4k rpm. Wouldn't the water pump and tensioners still make noise in park. Thinking cam gear now as this might be the cam gear clicking during the point when it tries to adjust the timing.

@4sythe wondering if you ever found the solution to this?


All times are GMT -7. The time now is 12:46 PM.


© 2024 MH Sub I, LLC dba Internet Brands