Building an IS350 6MT
#108
Well a couple major milestones have been passed today. After filling all of the fluids and bleeding the clutch it fired up first try! I even managed to drive it inside the shop a bit! It's slowly coming together! After driving the car a bit I think I will need to adjust the clutch pedal a bit as well.
See it in action in this super lame/awesome video!
I'm getting so excited to be able to properly drive it and feel what the car should have felt like from the factory.
Jeff
See it in action in this super lame/awesome video!
I'm getting so excited to be able to properly drive it and feel what the car should have felt like from the factory.
Jeff
Last edited by Jeff Lange; 03-18-16 at 10:16 PM.
#113
Driver School Candidate
Join Date: Jan 2016
Location: ont
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
This is perfect!!!
I just started looking into these cars and realized I wanted a manual but with 300+ HP.
This is great!
I joined this forum because of this thread.
I just started looking into these cars and realized I wanted a manual but with 300+ HP.
This is great!
I joined this forum because of this thread.
#114
The option Lexus never gave us !
The IS350 is already kickass to drive with the Autobox.. I could only imagine how the 6 speed must feel giving you full use of the engine.
Please do a review or a VIDEO review of the car.
The IS350 is already kickass to drive with the Autobox.. I could only imagine how the 6 speed must feel giving you full use of the engine.
Please do a review or a VIDEO review of the car.
#115
Driver School Candidate
Join Date: Jan 2016
Location: birmingham
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
hey jeff like your post, i have a is 250 manual trans, I'm in the uk, birmingham to be exact, i want to do the swap, my friend is sourcing a is 350 engine right now and just wanted to know if you can help with the ecm, of course if you charge i would pay, I'm doing the swap myself as have done a couple of toyota swaps in the past so I'm up for it. what do i need to do to get this running?
#116
Racer
iTrader: (2)
hey jeff like your post, i have a is 250 manual trans, I'm in the uk, birmingham to be exact, i want to do the swap, my friend is sourcing a is 350 engine right now and just wanted to know if you can help with the ecm, of course if you charge i would pay, I'm doing the swap myself as have done a couple of toyota swaps in the past so I'm up for it. what do i need to do to get this running?
#118
Driver School Candidate
Join Date: Jan 2016
Location: birmingham
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
What year is your 250?If it's 06 like mines you need all the VDIM ecus also to make it run.I m in Athens Greece and I really want this swap also but the best thing is to find a reck 350 and swap everything!If yours have VDIM of course it's a lot easier.If you don't mind me asking how much will an IS350 engine cost ?
#119
Racer
iTrader: (2)
Unfortunately I think it doesn't my friend.VDIM is an Ecu that controls all the car ecus or something like that but all IS350 has it so in order to make this swap work Jeff told me that the car should have it.The 250s started having VDIM from 2008 I believe.Jeff wasn't sure if it s really needed but I wouldn't try it if I wasn't sure.It still can be done but you have to find everything from a VDIM and take out the dashboard to install it.If 350 was an option in Europe it would be easier to find a wrecked one and swap everything from it.You may have better knowledge my friend if you have done other swaps I m just trying to help because I really want to do this too !
#120
Driver School Candidate
Join Date: Jan 2016
Location: birmingham
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunately I think it doesn't my friend.VDIM is an Ecu that controls all the car ecus or something like that but all IS350 has it so in order to make this swap work Jeff told me that the car should have it.The 250s started having VDIM from 2008 I believe.Jeff wasn't sure if it s really needed but I wouldn't try it if I wasn't sure.It still can be done but you have to find everything from a VDIM and take out the dashboard to install it.If 350 was an option in Europe it would be easier to find a wrecked one and swap everything from it.You may have better knowledge my friend if you have done other swaps I m just trying to help because I really want to do this too !