dfwjohnd

iTrader: (6)

I already have my fenders rolled, tabs shaved and liner flipped up.

Will these fit w/o much more modification? Currently on OEM wheels, so I feel like I'll need a camber kit... but will I need it for the front and rear?

And lastly, what tire size would be reccomended for this set up? Don't mind a little stretch as I've had set ups similar to this on other vehicles.

Anyone have a pic of thier car with a similar size?

dfwjohnd

iTrader: (6)

I should mentioned only the rears are rolled/tab cut. Will the fronts need to be rolled/tab cut with this set up?

VuSpec

iTrader: (1)

Should fit with a bit of camber and 225 front 245 rear

dfwjohnd

iTrader: (6)

in both the front and rear? What about sidewall for the 225 & 245, 35 or 40 sidewall?

Silec

iTrader: (10)

35s for both front and rear.

BoyOhBoy

iTrader: (9)

I'm actually trying to run the same set up right now with varstoenn's so I'm going to be constantly looking at this thread. I haven't done anything to the fenders yet. Can you link me to the thread regarding how you shaved your fender tabs and flipped the thing. Going to rent a roller soon as my coilovers are coming. BC R 14k/12k

BoyOhBoy

iTrader: (9)

Just realized I talked to you in my other thread. Ya I'm new but I'm trying to do my research and do big things. Learning from my friends who have already been in the game for some time now

laobo979

iTrader: (5)

225-35/245-35 setup camber kit from Megan cost you around $500 for 3 piece or figs $650 for 2 piece set up. I'm running this setup volk and I rub on dip on the rear. Front I have no issue unless I hit a hard dip cause my coilover are 10/8k rate.

Cyanide52

Right now I'm running that setup with bc coils 14/12 235/35/19 and 265/30 the front I have spc balljoints maxed out and got rid of any rubbing but on the back passenger I rub on hard bumps with about 1 finger gap which I will need to fix

BoyOhBoy

iTrader: (9)

I saw someone running the same setup but his tire size was 215/35 front and 235/35 rear. Does that require a lot of stretching?

Does the 225/35/19 245/35/19 require just a bit of stretch?

dannyboy26

iTrader: (11)

I have this setup, I did major fender roll and pull and completely cut off my fender tabs as well as into the metal towards the plastic piece behind the bumper and glad I did cause it would rub on my wheel as low as I am... In the rear also had to do camber arms and at -3.3 in the rear and now clear no problem

rydellluy

I haven't done anything to the fenders yet.

Cyanide52

How much it will stick out in the rears

kchow510

iTrader: (6)

I'm running 19x9.5 19x10.5 +22 with 225/35 & 255/35.

Front & rear fenders rolled, front bumper tab relocated, and megan rear camber kit. No pull.

Minor rubbing on dips.

Photos By Zach Zadoo Photography

Sffd103

iTrader: (16)

^Sweet pics Kevin!! You still got skills.