bogart247

good day mates.. just a newbie from here.. need help on selecting tyres.. i just bought 19"x8.5-front 19"x9.5-rear. should i buy 225/40-front 255/40-rear.. sorry i don't know the offsets of the tyres. I'm running IS250 2008 RWD all stock suspensions. any recommendation from you guys? thanks god bless all..

peyman

iTrader: (6)

225/40 will give you a slight rub when turning. i dont recall anyone getting 255/40/ for rear. most of the guys get 225/35 for front including myself, as for rear, i have 255/35 fits fine & great however some go with 265/30

MyIS350G

iTrader: (6)

without knowing the offsets, you probably cannot get the proper answers to your question.

Gville350

iTrader: (10)

^Agreed! We need to know the offsets first.

UniSlayEX

offsets are needed to give you a definitive answer. peyman has a pretty good stating point.

correct me if im wrong guys, but arent the offsets written on the inside of the wheel?

MyIS350G

iTrader: (6)

Yes and no,
there are some with stickers, and company such as Iforged usually dont have them on their wheels

SCWB

RWD
19X8.5 Front
19X9.5 Rear

You can run
225/35/19 Front with 265/30/19 Rear Or
235/35/19 with 255/35/19

Or you can mix between these two settings, depends on how do you want your car to look.

MyIS350G

iTrader: (6)

^ negative sir...
for example: I had 19x8.5 but because my offset was +20, I had to run 215/35/19 and they still rubbing with shaved fenders.

OP find offsets first before you get some random answers..

MashinA

iTrader: (20)

^^dude im running 9.5 +12 with a 215/35 and im only rubbing cuz im slammed.

bogart247

Thanks everyone.. I'll update you guys this week, when I receive my shipment from Victoria. Because I bought the BBS LMs. Im planning to buy 235/35 and 265/30. Will that look nice on a stock suspension? Thanks and god bless everyone..

dangy

iTrader: (1)

I ran 9.5+13 with a 215/35 tire before my fenders were super pulled and it was cake

whitebeast

iTrader: (5)

I have 19 x 8.5 235/35/19 front
19 x 9.5 275/30/19 rear
+30 offset all around
Need fender rolled in the rear, bumper tab mod in the front.

SCWB

Sir you are correct, sir. In my answer, I was meaning for normal offset----Something in the +40 to +30 range. Sorry that I overlooked the aspect of offset. At least my 8.5+35 F , 9.5+35 R work perfect with 235/35F and 255/35R.

Keppie

If you see my man Mark Webber please give him my regards.

bogart247

Guys I already have the offset for the front and rear wheel. Front 19x8.5 +35offset, rear 19x9.5 +40offset.