V-LEDs Flasher for 2IS
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2011
Location: CA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
V-LEDs Flasher for 2IS
I know this has been asked somewhere before, but on the V-LEDs website for their Lexus Flasher they state "NEW! Parking light flash confirmation WILL function."
http://www.v-leds.com/BlinkerWarning...viewsTabAnchor
Can someone confirm this or it still won't work? I'm not sure if this is a new flasher from the old ones that it seems people are having problems with the parking light flash.
I'm about to get LED's for the front signals.
Thanks!
http://www.v-leds.com/BlinkerWarning...viewsTabAnchor
Can someone confirm this or it still won't work? I'm not sure if this is a new flasher from the old ones that it seems people are having problems with the parking light flash.
I'm about to get LED's for the front signals.
Thanks!
#3
Driver School Candidate
Thread Starter
Join Date: Sep 2011
Location: CA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I don't mind it as well, but its my girl's car. I finally got her to let me mod it a bit, so I went with the lights first, HID's and LED's (everywhere). She says she hates the fast blink, but I suppose I could do the resistors thing. I just didn't want to go that route.
#4
Uber 1337 Moderator
iTrader: (65)
I looked into this replacement electronic flasher from V-LEDs as well but decided against it for 2 reasons. 1) It makes a clicking sound and 2) It only works for 4 sockets, so if you replace all 6 (in pre-2011 headlight assemblies there are 4 front turn signal bulbs) like I want to do, it wouldn't work. Your other option to avoid hyperblinking is of course resistors, or perhaps doing a DIY mod where you alter your existing electronic flasher: http://vleds.wordpress.com/2010/12/0...k-with-v-leds/
Some additional info info: http://vleds.wordpress.com/2010/10/2...r-hyper-flash/
Some additional info info: http://vleds.wordpress.com/2010/10/2...r-hyper-flash/
#5
Driver School Candidate
Thread Starter
Join Date: Sep 2011
Location: CA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I looked into this replacement electronic flasher from V-LEDs as well but decided against it for 2 reasons. 1) It makes a clicking sound and 2) It only works for 4 sockets, so if you replace all 6 (in pre-2011 headlight assemblies there are 4 front turn signal bulbs) like I want to do, it wouldn't work. Your other option to avoid hyperblinking is of course resistors, or perhaps doing a DIY mod where you alter your existing electronic flasher: http://vleds.wordpress.com/2010/12/0...k-with-v-leds/
Some additional info info: http://vleds.wordpress.com/2010/10/2...r-hyper-flash/
Some additional info info: http://vleds.wordpress.com/2010/10/2...r-hyper-flash/
Thread
Thread Starter
Forum
Replies
Last Post
Bigpmpn20
IS - 2nd Gen (2006-2013)
4
01-31-07 07:19 PM