iJDMTOY LED DRL Review/DIY *No Drilling*
#16
Pole Position
Thread Starter
iTrader: (1)
Join Date: Jul 2011
Location: Houston, TX
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Hey Bill,
Here's the link for the pics of the new slim decoders I'm running for my DRLs. So sorry for the long delay.
(just scroll to the bottom of the page)
https://www.clublexus.com/forums/is-...ml#post6628834
Here's the link for the pics of the new slim decoders I'm running for my DRLs. So sorry for the long delay.
(just scroll to the bottom of the page)
https://www.clublexus.com/forums/is-...ml#post6628834
I talked to Jason over at iJDMTOY and as soon as these are out of testing and fully available to market, he's going to let me know, and I update here.
#20
Driver School Candidate
iTrader: (4)
Join Date: Apr 2011
Location: Alberta
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Looks like I will have to be doing this when I get the LEDs in the mail. Nice work by the way. Was it hard to extend the wiring, can't say I've ever tried that but maybe I will give it a shot.
Thanks again!
Thanks again!
#21
Pole Position
Thread Starter
iTrader: (1)
Join Date: Jul 2011
Location: Houston, TX
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
If you know what that means and the answer is yes, you'll be fine!
Just make sure you don't crimp the connectors back on until the wires are ran from the HID/low beam housing to the high beam/DRL housing. Unless you figure out how to snake the connectors over, but I couldn't. Also don't forget to make sure the AFS HID unit can rotate still if you have factory HID without any wires or the decoder box stopping it.
Don't hesitate to PM me if you have ANY questions.
#23
Lead Lap
iTrader: (5)
Join Date: Aug 2009
Location: BC
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
i got the ijdmtoy led drls as well. been running them for half a year now.
all i did was buy the drl modules from vleds and the led drls from ijdmtoy lol and installed them. no drilling, no flickering, nothing.
all i did was buy the drl modules from vleds and the led drls from ijdmtoy lol and installed them. no drilling, no flickering, nothing.
#24
Pole Position
Join Date: May 2003
Location: Missouri
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
interesting. did the DRL modules fit inside the housing without any problems?
#28
Pole Position
Thread Starter
iTrader: (1)
Join Date: Jul 2011
Location: Houston, TX
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Their kit is being redesigned from what I've heard. Think that was posted in your other thread YoNadz. Like said before, its a great upgrade over the nasty yellow halogens no matter what company you go with. This thread was a just a heads-up about the iJDMTOY line.