ClubLexus - Lexus Forum Discussion

ClubLexus - Lexus Forum Discussion (https://www.clublexus.com/forums/)
-   IS - 2nd Gen (2006-2013) (https://www.clublexus.com/forums/is-2nd-gen-2006-2013-163/)
-   -   Rubbing on 20's (https://www.clublexus.com/forums/is-2nd-gen-2006-2013/567215-rubbing-on-20s.html)

jorgie523 Apr 25, 2011 08:01 PM

Rubbing on 20's
 
hey guys i need help my driving tire is rubbing but i dunno why im running 20's on my is350.. is anyone else having this problem ??? can some one help me out

twenty Apr 25, 2011 08:06 PM

Specs on the wheels and tires? Are you lowered?

iRock Apr 25, 2011 08:14 PM

Pics would be nice :D and where u rubbin at?

jorgie523 Apr 25, 2011 08:25 PM

yes im lowered and im running 20 x 9 +36 works vsxx.. and i dont know where im rubbing but my tire is getting cut but its only on the driver side

twenty Apr 25, 2011 08:28 PM


Originally Posted by jorgie523 (Post 6340292)
yes im lowered and im running 20 x 9 +36 works vsxx.. and i dont know where im rubbing but my tire is getting cut but its only on the driver side

You need to lose weight, jk.

Probably best to take that tire off and see if there are any noticeable rub marks within your wheel well. That's the first step to tackle it.

projectdna Apr 25, 2011 08:54 PM

it would also help to tell us the tire size and if you have performed any suspension modifications (i.e. aftermarket springs, coilovers, etc.)

jorgie523 Apr 25, 2011 09:10 PM

i have 245/30/20 falken 452.. and as far as lowering springs i got the megan racing 32 way full adjustable on the is350..lol that was funny about the weight im only 150lbs..

jorgie523 Apr 25, 2011 09:13 PM

im actually new to the lexus scene, i came from having an evo x to the is350 so theres alot of info i need.. i actually dont know any good websites for after market or anything like that ..

projectdna Apr 25, 2011 10:04 PM


Originally Posted by jorgie523 (Post 6340414)
i have 245/30/20 falken 452.. and as far as lowering springs i got the megan racing 32 way full adjustable on the is350..

are you running that set-up (245/30-20, 20x9 +36) in the front or the rear?

and where are the signs that the tire is getting "cut" - along the sidewall, on the tread, and/or the shoulder blocks?

have your fenders been modified - i.e. rolled, shaved, pulled, etc.?

the more information you provide, the easier it is to diagnose your issue.

NorCal510 Apr 26, 2011 12:51 AM

sounds like you might need a fender roll.

jorgie523 Apr 26, 2011 04:39 AM

Well it seen it's getting cut on the shoulder block. And yea that's my set up in the front.. I thought that you couldn't get ur front fenders rolled

projectdna Apr 26, 2011 09:02 AM

the front fenders can be rolled (i should know), but the real issue is your tire size.

245/30-20 in the front on a 20x9 +35 is too wide to not cause clearance issues. and since you have not done any fender modifications to your fenders, that in combination with the wider tires will cause the issue you're having.

two ways of remedying this. either modify your fenders, or switch to narrower tires - 225/30-20 for starters. just remember that while a new set of front tires may cost more than fender rolling, the former is essentially permanent.

if you're not ready to modify the front fenders of your 2is, go with narrower tires w/ the same aspect ratio.

Sffd103 Apr 26, 2011 09:12 AM

^ exactly what he said. I've seen people run that size tires in the rear!

jorgie523 Apr 26, 2011 11:26 AM

Ooh man I'm actually running a 285/35/20 in the rear... But if the front tires are to wide why is it only the driver side wearing out ??

laobo979 Apr 26, 2011 11:47 AM

Yeah check to see if your inner fender. Maybe the inner bumper tab that most people bang in. But your running a meaty tire front and rear.


All times are GMT -7. The time now is 07:06 PM.


© 2026 MH Sub I, LLC dba Internet Brands