F350

iTrader: (1)

Hey guys, my bro is asking for these wheel specs

19 x 8.5 +45 fronts
19 x 9.5 +48 rears

do you think he can get away with these tires ?

245/35/19 or 235/35/19 front
275/30/19 or 275/35/19 or 265/35/19 rear
( he prefers 35 series for more sidewall )

He is planning to drop the car maybe around 1-1.5" only

SCWB

Yes you can. No problem at all with your wheel spec but your speedo meter will be off by around 5% slower than the actual speed if you choose 265/35/19. 245/35/19 is also too wide for the front, you might have slight rubbing during the turn but it will be very slight rub with 19x8.5+45 front.

The best paring for the choice you gave above is 235/35/19 Front with 275/30/19 Rear.

lammy2012

Found a great deal on a set of rims, but I'm not sure if they'll fit. Can someone help me out?
07 IS250 RWD
19X9.5 + 22 - 225/35 (front) 19X11 +25 - 255/35 (rear)
I plan on lowering/tucking tire.

Help is much appreciated! Thanks.

bob4256

iTrader: (17)

Cant comment on tire fitment, but you will need fender mods to make those fit.

Roll, maybe pull, and relocate your fender tabs.

DnkNgs

Hey guys I have a 06 IS350 lowered on H&R springs. I have a set of 19x8.5 front and 19x10 rear. I got a really good deal on a set of 225/35/19 fronts and 255/30/19 rear. Do you guys think I will have issues on stretching out the rear with a 255 tire on a 10" wheel? I think the fitment should be ok IM worried about the tires. I already bought them so I really rather not have to sell these and wait to buy another set of rear tires. Let me know what you guys think. Thanks.

Silent53

255/35/20 on a 20x10 25+ offset on the rear. I'm already lowered on H&R Springs and had my fenders pulled. Am i gonna get a nice stretch? I already have a camber kit just in case but i wanna be able to be flush as much as possible

TLRD

iTrader: (3)

Anyone running 19x10+30 in the front? If so what fender mods did you do (hoping to just roll) and what camber and tire size should I be looking at?

:EDIT: I will be rim on fender in both front and rear**

Toster24

20x9 +37 fronts 20x10 +49 rear

rear fenders are rolled.

any fender mods required?

anyone have pictures of how it will look?

RVCAis250

You'll have a nice stretch but I'd rather run 265/30/20 if I were you. You'll also definitely be needing that camber kit to fit those wheels...

Depends how low you go....

You won't need a pull but may need to relocate your bumper tabs but again.. depends on how low you go

Offsets are necessary to determine fitment. And a 255 will stretch fine on a 10" wide wheel, in fact many people stretch more; so no, you won't have any major safety concerns. The tires you bought are fine but will they fit inside the fenders....

johnnyola

I have a es 300 3004 with 16 x 6 rims stock and 215/60/16...I put Is 300 rims on it 4 front rims 18 x 8 with 45 off set I put a 225 /50/18 on it but when I have 4 passengers or more the rear tires rub are the rims to big or can I do a smaller tire and will it ruin the smooth ride. what size would work so no rubbing with a full car? Thanks

TLRD

iTrader: (3)

I'll be rim on fender for the most part. Turns out the wheels are actually 19x9 and 19x10 with a higher offset.. So fitment should be fairly easy. Thanks for the input though!

DFig619

Newbie here, any pictures of 18" and 19"s on stock suspension?
Want to see how they look, considering I may be rolling with them before I drop on coils

F350

iTrader: (1)

Hi will these fit ?

Front 19x8.5 +45 245/35/19
Rear 19x9.5 +35 275/30/19

Dont plan on lowering for now but if ever around 1 to 1.5 inch in the future

Thanks!

Nikon

iTrader: (2)

you shouldn't have any problems. even with the drop.

stanjohn12

Thanks a lot An2ny, I think I will go with the stock tire size itself.

Traffic rules are pretty strict and it's going to be a big headache if the bigger tires don't fit my OEM wheels as I'm getting the wheels from US.