Could someone help me out with post #3848 please.

 

guys someone is selling Vossen VVSCV3 localy with this info:

Front-19" x 8.5", +30 Offset, 5 x 120.65 Bolt pattern. Rear-19" x 10", +22 Offset, 5 x 120.65 Bolt pattern.

what I want to know is if they will fit 2009 is250?

Thank You

 

Lexus IS bolt pattern is 5 x 114.3, so those will not fit without adapters.

 

They will not fit on the 2IS. Our bolt pattern is 5x114.3

 

Those will definitely fit and should be flush looking with a mild drop. You may have to do some fender work though. As for tires, do a 225/30/20 up front and 255/30/20 in the rear as long as you don't have AWD. Make sure that the front wheel clears the IS350 brakes.

 

Those specs will be fine. Just dont choose too too wide of a tire or you might experience rubbing.

 

Is it possible to tuck in the rear without fender mods? (sorry if this is a dumb question)

 

19x8.5 +25 or +30
19x9.5 +25 or +30
225/35/19 265/30/19

roll the fronts for +25? would a +30 F be able to avoid doing so?

as for the rear, rear fenders are rolled, car sits at 25" ground to fender front and rear. it seems like the rear should be fine with +30, but would a +25 R require me to do a slight pull or shave?

 

help!!! i have the f sport 19x8 & 19x9 rims with the lame *** oem tires. wondering what tires i should run with a stretch look but not way too aggressive, im also lowered on the f sport springs with shocks i do plan on roucking coilovers but its one thing at a time for now, this is my DD vehicle!

 

Thank u for the reply

 

i currently have 19x10.5 +22 in the rear with a 245/35 tire
but when i go up driveways my wheels tuck a little and it rubs
will at 19x11 +25 or +30 with a 245 rub?
will the rim stick out more? or go in more?
i just wanna make sure that it doesnt rub and make that horrible noise.
thanks!!

 

Noob question but can i run this setup. My RWD is250 is gonna be dropped on RM springs which is a 2 inch drop but i was wondering if i could do this.


XXR 521's
front 18x10 +25 225/40/18
rear 18x10 +25 255/35/18 or should i do 245/40/18

both F and R wheels have a 3.5 lip

I really don't know what offsets and tire size will work. I'm a noob.

 

Please do not stretch tires on 8 and 9 inch wide rims, specially that you are on springs and it will look horrible. I would stick to OEM LAME *** TIRES because your offsets aren't exactly aggresive.

With a +25 it will rub and most likely with a +30 as well, you need camber arms. Have you shaved the rear tabs?

Too aggresive upfront unless you plan to roll/pull/shave front fenders and relocate the tabs. Rears should be good with a roll and pull.

 

nope, i havent
will that extra half inch make the wheel stick out that much more?
cus with my wheels now, i really dont need much space for it to not rub
oh and if you can help me out with this too itd be great, i delted my front two tabs and now my bumper falls a loose and disconnects from my fender, how can i reinforce or fix this?

 

Hey guys. I've searched a ton and can't get direct answer. I have the sport suspension on my is350 (don't know if drop is any different). I'm looking at 2 sets of wheels. I don't want to roll or pull fenders.
Forgestar f05
19x8.5 et 45 front and back
235/35/19
First will these clear BBK?
What's maxx offset for flush without rubbing.

or
20x8.5 et32
245/35r20
Rears 20x10.5 et30
285/30r20

Any help is appreciated.