Thanks for the response. I want to minimize fender mods. Should I go with a 35 profile, don't drop as low (planning on a 1-2 finger gap), or look into a different wheel size?

 

my suggestions for 18's unless you 100% need to drop to a 35 series i wouldnt. and i mean need as in 18x9.5+15 18x10.5+10 where 215/40 and 235/35 would be used. where you need the crazy stretch. if your looking to run something like 235/35 on a 9 youll be good but itll probably throw the speedo off not having a staggered setup(unless you have a 250awd) But it WILL give ou better clearance for the fenders and fender liners up front.

It didnt matter much to me since i go with the flow of traffic. the tires i run arent ever based on outside rolling diameter, what ever size fits i run.

 

Can someone give me a hand with my setup. I have a 19 by 8.5 rim with 225/35/19 tires with a 45 offset. I have a local guy selling some 25mm kics spacers, would this be too aggressive and require fender mods for the rear? This is for an AWD is 350 dropped on Fsport springs. Thanks guys

 

with 25mm spacers roll your front, roll your rears.

 

Dang 25mm spacers!!! I wouldn't run more than 15mm even with extended studs, but that's just me lol

 

What would be the max spacer size that I could run without fender mods? Thanks for the advice looks like ill stay away from the 25s

 

5mm conservatively, 10mm if you want to press your luck.

 

19x10 +7 front, 19x10.5 +14 rear, will it fit? I'll be rolling my fenders, with a slight pull, stretched probably on 225-40s and adjusting camber

 

Need a hand here. I ordered my wheels, 18X8 up front with 40 offset, they sent 30 offset. Should I return them or am I OK? 225/40 tires, IS350 lowered on F-sport coils.

Thanks!

 

your good man

 

Just talked to the place I got the wheels from. Apparently Foose was having some brake clearance problems on the 350 with a 40 offset, so they sent 30 offset. looks like I am good to go, thanks for the reassurance though Mia!

 

Pull the fronts 225/35, camber as much as possible set toe to neutral.
Roll and pull the rear, figs camber arms, 235/35 set camber to where ever you pull too. Set toe to neutral. I wanna see pix

 

^^
Wow, do u have a picture in your mind how the setup would be like?

btw will 19x9 +25 with 235/35R19 in the rear on BC coilover rub?

 

Hey guys can you help me out to see if i can any of these would work in the front without any fender mods?

19x9.5 +33 235/35/19
or
19x9.5 +37 235/35/19

 

I'm wondering if these Varrstoen wheels will fit..
They're 19x9.5 +22 and 19x10.5 + 22

I think they also make them in +30 but +22 would be a kick *** dish. I'm sure Id have to stretch tires but no idea what size to go with. I'm going to be lowered on Megan Racing EZ streets. Don't really want to have to roll the fenders but I will a little bit.

Anyone ever use the varrstoen wheels??