Mv350

iTrader: (23)

leave it just like that. might need a slight roll in the rear

MashinA

iTrader: (20)

would that be flush or could i use some spacers?

Mv350

iTrader: (23)

you could use some spacers but that means you would need more mods and smaller tires

rockinalex

iTrader: (4)

can i run the same size rim all the way around. . . knowing that stock rims/tires are larger in with in the rear ?

Mv350

iTrader: (23)

yes. what width. tire and offset would you like to know about

alr33x

hey mv350 just want to pick your brains again..

19x8.5 + 27 (F) and 19x9.5 + 24 (R) 245/45 all round.

first question is how much wrk to fit just a guard roll? 2nd quesiton is how will they look i cant find example of that size/offset and 3rd.. they are volk gtc but i cant find a pic of anyone with gtc's >_<

Mv350

iTrader: (23)

front tires are too big. you would need to go to a 225/35 or 215/35 front
this is when i had my 19x8.5+25 19x9.5+25 setup. i was tucking alot of tire. so with out being this low it sits quite well. but you need to roll the rears for it to work

alr33x

thanks man

still looks fair sunken or did you have it cambered in cos you wanted to sit so low?

Mv350

iTrader: (23)

the car has quite a bit of neg camber because i was low. at one point i had enough camber to tuck 19x9.5+15 in the rear fenders.

an average drop wont have that much

kado413

iTrader: (6)

is 19x9.5 +24 and 19x10.5 +24 pushing it?

right now im on 19x9 +22 19x10 +25 on coil overs (was dumped but just raised it to save some tire wear)
im checking out the weds sports sa55m's...below are the only 19's..what would be the best choice?
19x9.0" +38, +45
19x9.5" +15, +24
19x10.5" +15, +24
thanks in advance!!!!!

integlspwr

iTrader: (2)

Get 18s cause they have the RR face which is why i didnt get the 19s.

also has anyone done.

18x10.5 +22 on the FRONT ?

kado413

iTrader: (6)

Ooh, really?? Only the 18's are concave..those are the ones I want. Do the 18x9 or 9.5 have that face or just the 10's?

integlspwr

iTrader: (2)

the 19s concave but only in a R face. the 18x10 has RR face which is nicer.

i have the 18x10 +18 all around on my car.

lmk if u want pics.

Mv350

iTrader: (23)

just post pix hahahaha

kado413

iTrader: (6)

Yeah, let me see some pics...
How much fender work did you need to do to get those 10's in the front?