Rear GFX lip gaps...
#1
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Toronto, Ontario, Canada
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Rear GFX lip gaps... BEWARE OF CARTECH AUTOBODY in TORONTO
Hi all,
I just had my GFX rear installed on my 06 IS350. I noticed gaps around the rear sides (about half a cm). I talked to the guy and he said he tried everything to get the gap small. He said that this could be because since the car aged, so has the plastic so the fitment might not be perfect.
Can anyone chime in on this? Do you think I can buy some double sided tape and put it in the gap to try and close it? What's the recommended double sided tape?
thanks!
I just had my GFX rear installed on my 06 IS350. I noticed gaps around the rear sides (about half a cm). I talked to the guy and he said he tried everything to get the gap small. He said that this could be because since the car aged, so has the plastic so the fitment might not be perfect.
Can anyone chime in on this? Do you think I can buy some double sided tape and put it in the gap to try and close it? What's the recommended double sided tape?
thanks!
Last edited by w1ck3d64; 10-09-09 at 07:06 PM.
#4
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Toronto, Ontario, Canada
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
http://www.canadiantire.ca/AST/brows...ing%2BTape.jsp
would this be the one? i'm just going to use some forceps to stick it into the gap and PUSH lol
Trending Topics
#8
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Toronto, Ontario, Canada
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
well the back is perfectly fine...it's just the rounded sides...he's pretty reputable in my area and has done a lof of GFX rears but in any case...i hope the tape will fix it...seems like it would...that lexus double sided tape that comes with it SUCKS
#11
Lexus Test Driver
iTrader: (13)
You have to reinstall the kit. It was not properly installed... Tell him to follow exactly how the instruction shows and before tightening the bolts, it must be perfectly aligned. The kit does not have any gap whatsoever.. I had to reinstall mine twice to get it perfect And lol noway the plastic can age like that and give that big of a gap difference....
#12
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Toronto, Ontario, Canada
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Bingo!..
You have to reinstall the kit. It was not properly installed... Tell him to follow exactly how the instruction shows and before tightening the bolts, it must be perfectly aligned. The kit does not have any gap whatsoever.. I had to reinstall mine twice to get it perfect And lol noway the plastic can age like that and give that big of a gap difference....
You have to reinstall the kit. It was not properly installed... Tell him to follow exactly how the instruction shows and before tightening the bolts, it must be perfectly aligned. The kit does not have any gap whatsoever.. I had to reinstall mine twice to get it perfect And lol noway the plastic can age like that and give that big of a gap difference....