Staggered setup on AWD ! - The Mother Thread - !
I'm thinking about running the 19" genesis wheels on my 07 is250 awd. The rims come staggered 19x8 and 19x8.5. My car will be lowered on H&Rs so I'm wondering what would be the ideal tire size for this set up. Any advice is appreciated!
Hey guys I'm a noob to the staggered set up so I need some advice. I'm dropped 1.25 on meagan springs. Had 20x8.5 all around before 245/30/20 tires off set was 35 no rub or anything. I'm getting ready to order two sets of wheels. I'm getting ready to pick up two sets of wheels and need to figure out what tires and off sets to go with and not have to stretch my tires roll my fenders or anything crazy
First set
19x8.5 front
19x9.5 rear
Second set
20x9 front
20x10 rear
First set
19x8.5 front
19x9.5 rear
Second set
20x9 front
20x10 rear
Thought I would bring this thread back up. Here's my set up. Avant Garde M310. Front 19x8.5+35. Back 19x9.5+40.....I know I know "drop it". Will be doing that soon. Just got these wheels yesterday.
My set up
Bolt Pattern: 5x114.3 Rim Width: 8.5F & 9.5R
Hub Bore: 60.1 Rim Diameter: 19
Rim Brand: LFA Replica Offset: +38F & +45R
235/35/19
275/30/19
dropped 1.25 on Megan springs. No rub. Fenders aren't modded either.



http://public.fotki.com/remydee/the-is-journal
Bolt Pattern: 5x114.3 Rim Width: 8.5F & 9.5R
Hub Bore: 60.1 Rim Diameter: 19
Rim Brand: LFA Replica Offset: +38F & +45R
235/35/19
275/30/19
dropped 1.25 on Megan springs. No rub. Fenders aren't modded either.



http://public.fotki.com/remydee/the-is-journal
Last edited by RDIS250AWD; Jul 7, 2012 at 09:27 AM.
Concept One Vision; Black with Polished Lip
Front: 19x8.5 +38, Nexen N3000 235/35/19 Minor rubbing front passenger on tight turns
Back: 19x9.5 +45, Nexen N3000 265/30/19 No Problems
Dropped on H&R Springs
No difference on gas milage, car feels a little heavier, never had a lowered car on rims (im a newbie lol). Any thoughts on what could be causing the rubbing?
Front: 19x8.5 +38, Nexen N3000 235/35/19 Minor rubbing front passenger on tight turns
Back: 19x9.5 +45, Nexen N3000 265/30/19 No Problems
Dropped on H&R Springs
No difference on gas milage, car feels a little heavier, never had a lowered car on rims (im a newbie lol). Any thoughts on what could be causing the rubbing?
My set up
Bolt Pattern: 5x114.3 Rim Width: 8.5F & 9.5R
Hub Bore: 60.1 Rim Diameter: 19
Rim Brand: LFA Replica Offset: +38F & +45R
235/35/19
275/30/19
dropped 1.25 on Megan springs. No rub. Fenders aren't modded either.



http://public.fotki.com/remydee/the-is-journal
Bolt Pattern: 5x114.3 Rim Width: 8.5F & 9.5R
Hub Bore: 60.1 Rim Diameter: 19
Rim Brand: LFA Replica Offset: +38F & +45R
235/35/19
275/30/19
dropped 1.25 on Megan springs. No rub. Fenders aren't modded either.



http://public.fotki.com/remydee/the-is-journal
How's your tire wear? Are your tires stretched?
Thanks
I don't see many people running 18s! Or I just didn't look hard enough...
Anyways, anybody got stagger 18" setup on their IS250 AWD?
I'm dropped on H&R so just wondering if there's a safe staggered setup for 18", stretched
Anyways, anybody got stagger 18" setup on their IS250 AWD?
I'm dropped on H&R so just wondering if there's a safe staggered setup for 18", stretched
I'm new to club lexus and figured I better start somewhere.
Over the weekend i finally got around to putting a set of Borbet style 95's from a BMW 7-series on my awd 2IS.
Front 19x9 et 24 215-35-19
Rear 19x10 et 24 225-35-19
dropped on road magnet springs with no rubbing.
Can't wait for my BC coils so i can go low!


Over the weekend i finally got around to putting a set of Borbet style 95's from a BMW 7-series on my awd 2IS.
Front 19x9 et 24 215-35-19
Rear 19x10 et 24 225-35-19
dropped on road magnet springs with no rubbing.
Can't wait for my BC coils so i can go low!


at least replace the BMW center caps 

I'm new to club lexus and figured I better start somewhere.
Over the weekend i finally got around to putting a set of Borbet style 95's from a BMW 7-series on my awd 2IS.
Front 19x9 et 24 215-35-19
Rear 19x10 et 24 225-35-19
dropped on road magnet springs with no rubbing.
Can't wait for my BC coils so i can go low!



Over the weekend i finally got around to putting a set of Borbet style 95's from a BMW 7-series on my awd 2IS.
Front 19x9 et 24 215-35-19
Rear 19x10 et 24 225-35-19
dropped on road magnet springs with no rubbing.
Can't wait for my BC coils so i can go low!






