All4sho350

iTrader: (7)

Thanks Zoeb from wheeldude.com! wheels are amazing. i just been hearing this wierd noise when im making turns. It turns out that when i make a / or a \ turn the backside of the tire is barely rubbing the wheel well plastic corner in the inner corner. Im dropped on H&R springs. the tires are 235s and the wheels are 19 x 8.5 in front. boths sides are rubbin into the plastics. Has anyone else experience this with their drop and wheels? Im trying to avoid removing the wheel well plastics. Figured i would just let time wear down the tires or have th rpms melt down the plastics. However i was thinking maybe a heat gun and put the plastic back? Please help

mdgrwl

iTrader: (7)

what offsets are you running?

FYI - 235 tires give many members issues in the front. You could simply heat gun (heat and push in) the plastic that is rubbing. That takes car of 90% of rubbing issues...

A1Lexis

iTrader: (6)

I have the same wheels, same springs and had the same minor rubbing problem on the front. I took the wheels off and used a heat gun on the plastic lining. Problem solved. GL

windex

iTrader: (1)

Im running a 245 30 19 up front and what are fender liners I dont even think I have fender liners anymore

IS-SV

I'm running 235/35/19 in front with 19"x8.5" 35 offset wheels. I get very slight rubbing on plastic liner too, not enough to worry about.

Plit

i slightly rub, but nothing to worry about. haven't had any issues to keep me up at night

hmsis250

iTrader: (5)

use a heat gun or let it rub through!

crapoud

I heat gun mine, now its all good!

IS-SV

I let it go since it was so minor, now it's rubbed away enough plastic to be almost nonexistent.

IS-SV

btw, anybody know the offset of the 19x8.5 front wheels in question?

GiantsFan

iTrader: (9)

I have 19x8.5 +30 fiveaxis s5:f with 235/35 and I also rub.... anyone in norcal with a heat gun? LOL

is2seattle

iTrader: (1)

I don't have any rubbing issue. I am running 235/35/19 +35 offset. Heat gun might be the best solution.

kickin8

iTrader: (1)

heat gun will do the trick...

kickin8

iTrader: (1)

front

19x8.5 +28

jns350

iTrader: (7)

rub-a-dub-too with 19x8.5 235 series...too lazy to heat gun it for now...seems my tire still ok though...BTW post a pic of your new shoes when you get a chance..I like Linas!!!