★★★★★ Official Vossen Owners Thread ★★★★★
#1231
Thanks bro, yes it's lowered. I'm on h&r springs for now but I'm upgrading to coil overs in March. No I don't rub with the specs I'm running. I have a few new mods this year.
#1233
Driver School Candidate
Join Date: Jan 2016
Location: Toronto
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Vossen question
Hey, I did a search already but I couldn't find what I was looking for.
I'm new to this forum so Sorry if I'm Posting this in the wrong group.
I have a 08 is250awd and want to purchase a set of Vossen 083 that was previously on a is350rwd. The size is 19" +35 front & +30 rear with 225 on front and 275s on rear.
My question is would this fit?
I'm new to this forum so Sorry if I'm Posting this in the wrong group.
I have a 08 is250awd and want to purchase a set of Vossen 083 that was previously on a is350rwd. The size is 19" +35 front & +30 rear with 225 on front and 275s on rear.
My question is would this fit?
#1234
Former Sponsor
iTrader: (2)
Hey, I did a search already but I couldn't find what I was looking for.
I'm new to this forum so Sorry if I'm Posting this in the wrong group.
I have a 08 is250awd and want to purchase a set of Vossen 083 that was previously on a is350rwd. The size is 19" +35 front & +30 rear with 225 on front and 275s on rear.
My question is would this fit?
I'm new to this forum so Sorry if I'm Posting this in the wrong group.
I have a 08 is250awd and want to purchase a set of Vossen 083 that was previously on a is350rwd. The size is 19" +35 front & +30 rear with 225 on front and 275s on rear.
My question is would this fit?
Recommended flush offset is +40 on the rear
A +30 will poke and you'd likely need to stretch at least a 255 with some camber to fit those without rubbing depending on your height!
#1237
Driver School Candidate
hey, I have 08 IS250 rwd with 18" stock wheels and now I want to change it to Vossen CV5. The question is: can I go F: 20x9 and R: 20x10?? And what size for tires should I go with??
Thanks
Thanks
#1239
Driver School Candidate
I am planning to lower my car after this done. And I dont want my tire hit the fender and rub it as well. So can you give me some suggest for my offset?? Thanks.
#1241
Lexus Test Driver
iTrader: (1)
Join Date: Jan 2008
Location: Vacaville, CA
Posts: 957
Likes: 0
Received 0 Likes
on
0 Posts
Any of you guys have the clear coat peel off of you Vossen rims? I've had my CV3s for just over 2 years, Matt black, machined face. At 1 year both drivers side rims started having the clear coat peel off. Had them replaced under warranty. Now at 2 years the passenger side has both wheels clear coat pealing as well as one of the new rims on the drivers side. Not sure what to do. May just have them powder coated this summer. Love the rims but the finish sucks. Always hand washed never use any wheel dressing or wheel cleaner. Just crappy clear coat.
#1242
Lexus Fanatic
iTrader: (1)
Any of you guys have the clear coat peel off of you Vossen rims? I've had my CV3s for just over 2 years, Matt black, machined face. At 1 year both drivers side rims started having the clear coat peel off. Had them replaced under warranty. Now at 2 years the passenger side has both wheels clear coat pealing as well as one of the new rims on the drivers side. Not sure what to do. May just have them powder coated this summer. Love the rims but the finish sucks. Always hand washed never use any wheel dressing or wheel cleaner. Just crappy clear coat.
I took extra great care of my wheels so that isn't an issue. I'm using the same cleaning process on my current wheels so that proves my soaps aren't too harsh (Dawn).
Maybe a wheel company will read this and chime in.