Aftermarket Wheel Owners Post Your Setup
06-18-06, 09:19 AM
#61
Pole Position
Join Date: Jan 2006
Location: CA
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
Here is my Crystal White with iForged Daytonas
Front: 19x8 with a 235/35/19 Toyo T1R
Rear: 19x10 with a 275/30/19 T1R
Not sure of the offsets. iForged makes each wheel custom for each application. They are Tire Sensor compatible!
Front: 19x8 with a 235/35/19 Toyo T1R
Rear: 19x10 with a 275/30/19 T1R
Not sure of the offsets. iForged makes each wheel custom for each application. They are Tire Sensor compatible!
Last edited by javyLSU; 12-20-07 at 10:23 PM. Reason: Fixed link to pictures
06-21-06, 02:22 PM
#62
Driver School Candidate
Join Date: Jun 2006
Location: Ca
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
"Stash" is my buddy he did the Volk's, HID's, Lowering Etc.. He has moved on to another project and sold the car to me! Does this help all you haters?
Last edited by Fletch M3; 06-21-06 at 02:28 PM.
06-24-06, 11:24 AM
#63
Originally Posted by sashax415
Any opinions on the iforged aeros? I just ordered these in hi-polished 19x8/19x10 through the D2 groupbuy for my 350, but haven't seen them on any 2IS's yet...
Just kidding!!! 
I'm just busting people's chops here for calling ghetto everybody who buys nice wheels.... go figure!!! Anyways, I really think they will look good because they have a simple, refined and sporty design. I've attached 2 pics of an M3 that has the wheels in the same finish that you ordered them so you get an idea how they will look. The owner of that M3 shouldn't have put all that stuff in that car, as it takes away from its natural elegance... enjoy the pics!!
Last edited by javyLSU; 06-27-07 at 10:44 PM. Reason: fixed quote
06-27-06, 07:57 PM
#65
Driver School Candidate
Join Date: Apr 2006
Location: NC
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Wheels are here, too bad tires aren't:(
PIAA Super Rozza in Hyper Black (19x9.5, 42 Offset)(19x8.5, 42 Offset), still waiting on tires (1 day left, woot).
I've done a few mods which I have posted I've posted in the mods thread too
I've done a few mods which I have posted I've posted in the mods thread too
06-29-06, 12:20 PM
#66
Driver School Candidate
Join Date: Apr 2006
Location: NC
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Wheels:
PIAA Super Rozza, Hyper Black
19x8.5 Front, 42 Offset
19x9.5 Rear, 42 Offset
Tires came in yesterday:
235/35YR19 Goodyear Eagle F1 GS-D3
275/30YR19 Goodyear Eagle F1 GS-D3
Springs:
Tanabe DF210
Spring Compressor:
Free Rental at Autozone:P
Front Corner: No rubbing at all.
Rear Corner: No rubbage
PIAA Super Rozza, Hyper Black
19x8.5 Front, 42 Offset
19x9.5 Rear, 42 Offset
Tires came in yesterday:
235/35YR19 Goodyear Eagle F1 GS-D3
275/30YR19 Goodyear Eagle F1 GS-D3
Springs:
Tanabe DF210
Spring Compressor:
Free Rental at Autozone:P
Front Corner: No rubbing at all.
Rear Corner: No rubbage
Last edited by javyLSU; 12-20-07 at 10:26 PM.
07-06-06, 08:49 PM
#69
Pole Position
Join Date: Nov 2005
Location: Calgary, Alberta
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Some from Driven to Perform in Calgary, been too lazy to post. And just got the pictures from my friend recently. I should go out for better quality photos...but I'm way too lazy.... One day! Here's some for now.
PIAA SuperRozza, 19x7.5 with +42 offset. AWD IS250, didn't want to have any problems so I took the safe road with the 7.5 width. Plus, the PIAA fitment booklet suggested this size anyways so I went with their words.
Tanabe DF210 off a GS430, nice stiff ride, not too stiff though.
The shop suggested spacers for the rear, so I'm getting some custom made just for the rear. But I don't know when yet, the person that makes the spacers isn't in town recently so that'll have to wait for now until he is available.
PIAA SuperRozza, 19x7.5 with +42 offset. AWD IS250, didn't want to have any problems so I took the safe road with the 7.5 width. Plus, the PIAA fitment booklet suggested this size anyways so I went with their words.
Tanabe DF210 off a GS430, nice stiff ride, not too stiff though.
The shop suggested spacers for the rear, so I'm getting some custom made just for the rear. But I don't know when yet, the person that makes the spacers isn't in town recently so that'll have to wait for now until he is available.
Last edited by javyLSU; 12-20-07 at 10:27 PM.
07-08-06, 05:26 PM
#70
Driver
Join Date: Feb 2006
Location: arizona
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sanwong
still in trasnsit............hopefully this week!!!!!!......scratch that.......will be in my hands tonight and hopefully on tomorrow!!!!!!!!!!!!!!!!!!!!!!
ASANTI AF120 CHROME
FRONT WHEEL 20X8.5 235/30/20 2 INCH FRONT LIP
ASANTI AF120 CHROME
REAR 20X10 275/30/20 3 INCH LIP
MY ANSWER TO THE TPMS PROBLEM.....NO WHEELBARROW WHEEL IN THE TRUNK OF MY IS350
Last edited by javyLSU; 12-20-07 at 10:29 PM.
07-10-06, 05:56 PM
#71
Finally got the Sienna's mounted and balanced....
Specs are:
19x8.5 +30 with 235-35-19
19x9.5 +38 with 265-30-19
Wheels fit with no rubbing and I don't think I'll have to roll the fenders. These JUST fit ......
Sorry for the poor pics....next pics won't be until my kit is installed with the new grill and wing.
Specs are:
19x8.5 +30 with 235-35-19
19x9.5 +38 with 265-30-19
Wheels fit with no rubbing and I don't think I'll have to roll the fenders. These JUST fit ......
Sorry for the poor pics....next pics won't be until my kit is installed with the new grill and wing.
07-12-06, 10:46 AM
#72
Driver
iTrader: (1)
Join Date: May 2006
Location: ca
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MrMark
Finally got the Sienna's mounted and balanced....
Specs are:
19x8.5 +30 with 235-35-19
19x9.5 +38 with 265-30-19
Wheels fit with no rubbing and I don't think I'll have to roll the fenders. These JUST fit ......
Sorry for the poor pics....next pics won't be until my kit is installed with the new grill and wing.
Specs are:
19x8.5 +30 with 235-35-19
19x9.5 +38 with 265-30-19
Wheels fit with no rubbing and I don't think I'll have to roll the fenders. These JUST fit ......
Sorry for the poor pics....next pics won't be until my kit is installed with the new grill and wing.
Absolutely awesome.....thinking about getting gold wheels for my Tungsten as well....what kind of wheels are those? and are they multi piece...are those springs you have in production to sell yet...sorry for all the questions.
Last edited by javyLSU; 06-27-07 at 10:50 PM. Reason: removed pictures from quote
07-15-06, 01:41 PM
#73
Pole Position
Join Date: Apr 2006
Location: Houston, Texas
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
Well, I finally got the wheels put on, as well as the springs and exhaust. So I thought it was time to post the pics.
Lexus IS model: IS350
Wheel Make & Model: Volk Progressive ME
Wheel Size (diameter and width): 19x8 (f) / 19x9.5 (r)
Wheel Offset Front: +43
Wheel Offset Rear: +45
Compatible with tire pressure sensors? yes
Tire Make and Model: BF Goodrich KDW
Tire Size Front: 235/35/19
Tire Size Rear: 265/30/19
Suspension mods: Eibach Pro-Kit
Amount of drop: 1" front / .8" rear
full car pics in the forum:
https://www.clublexus.com/forums/sho...d.php?t=227361
Greg
Lexus IS model: IS350
Wheel Make & Model: Volk Progressive ME
Wheel Size (diameter and width): 19x8 (f) / 19x9.5 (r)
Wheel Offset Front: +43
Wheel Offset Rear: +45
Compatible with tire pressure sensors? yes
Tire Make and Model: BF Goodrich KDW
Tire Size Front: 235/35/19
Tire Size Rear: 265/30/19
Suspension mods: Eibach Pro-Kit
Amount of drop: 1" front / .8" rear
full car pics in the forum:
https://www.clublexus.com/forums/sho...d.php?t=227361
Greg
Last edited by glilly; 07-15-06 at 01:49 PM.
07-17-06, 02:18 PM
#74
Pole Position
Join Date: Apr 2005
Location: OC, CA
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MrMark
Finally got the Sienna's mounted and balanced....
Specs are:
19x8.5 +30 with 235-35-19
19x9.5 +38 with 265-30-19
Wheels fit with no rubbing and I don't think I'll have to roll the fenders. These JUST fit ......
Sorry for the poor pics....next pics won't be until my kit is installed with the new grill and wing.
Specs are:
19x8.5 +30 with 235-35-19
19x9.5 +38 with 265-30-19
Wheels fit with no rubbing and I don't think I'll have to roll the fenders. These JUST fit ......
Sorry for the poor pics....next pics won't be until my kit is installed with the new grill and wing.
07-17-06, 03:23 PM
#75
Driver School Candidate
Join Date: Jul 2006
Location: FL
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I finally got my weels put last week. I must say that I was really happy with the outcome!
Lexus IS model: IS350
Wheel Make & Model: Foose DF-5
Wheel Size (diameter and width): 20x8.5 (f) / 20x10 (r)
Wheel Offset Front: +38
Wheel Offset Rear: +43
Compatible with tire pressure sensors? yes
Tire Make and Model: Nitto NT555
Tire Size Front: 225/35/20
Tire Size Rear: 275/30/20
I wanted to know what everyone thought of them and I will have more pictures to post in the next few days.
Lexus IS model: IS350
Wheel Make & Model: Foose DF-5
Wheel Size (diameter and width): 20x8.5 (f) / 20x10 (r)
Wheel Offset Front: +38
Wheel Offset Rear: +43
Compatible with tire pressure sensors? yes
Tire Make and Model: Nitto NT555
Tire Size Front: 225/35/20
Tire Size Rear: 275/30/20
I wanted to know what everyone thought of them and I will have more pictures to post in the next few days.