2JZSteven

iTrader: (2)

I am thinking about going lower. But my liners are getting in the way. I'm scared that if I take it off something might get damage. Anyone have any feedback if I should or not. Thanks.

mrbananas

iTrader: (1)

I was thinking of the same thing since I tried using heat gun to remold it and eff up...

d7620

i'm planning to take mine off too. keeps on rubbing when i make a full turrn. just ziptie / tape all the wires together

rvalero

iTrader: (1)

Try using a metal roller when you remold the liner.

mrbananas

iTrader: (1)

hmmm sorry for the stupid question but where do you get that roller?

rvalero

iTrader: (1)

It's called a seam roller. I believe it was intended for use on wallpaper. Try Home Depot.

http://www.bestmaterials.com/detail.aspx?ID=17084

SuthrnGent

iTrader: (3)

I have about and inch or so of mine cut and it's no problem

thatPOLISH

iTrader: (1)

id do what you gotta do to keep them in its better than dirty door jams

TobiasSing

I cut a few inches of mine out from the 9:00 to 3:00 position. You can remove them though, no problem. It'll just look weird.

d7620

how bout reshaping it ? saw it somewhere on the forum...

2JZSteven

iTrader: (2)

i think i might try remolding them. so heat gun and that roller thing will work rvalero?

rvalero

iTrader: (1)

and some patience. I would also use a bucket of ice water and a rag. Cooling off the surface will help the plastic harden faster and help keep it from trying to regain it's original shape. Take your time, and be careful around the paint. This should help you out: https://www.clublexus.com/forums/is-...ay-1-a-10.html

Roninsan

iTrader: (1)

I would try my best to retain my liners. Readjust, trim, or heat to reshape them. Would you not be hearing rocks and other crap flying off your tires and hitting the inner wheel well while you are driving if you completely removed the inner liners?

imjohnnyle

iTrader: (1)

damn, those little details! wonder when our sc's will meet