ClubLexus - Lexus Forum Discussion

ClubLexus - Lexus Forum Discussion (https://www.clublexus.com/forums/)
-   International (https://www.clublexus.com/forums/international-27/)
-   -   CL-New Zealand (https://www.clublexus.com/forums/international/674893-cl-new-zealand.html)

BCHDAZ 01-24-13 07:57 PM

CL-New Zealand
 
Hello all, if your in NZ, please be sure to put a post up here and ask other New Zealanders to do so as well.

would be great to see who's out there, and what your doing!


Anyway's... im Nathan AKA: BCHDAZ

always ready to help out other's and do my best to find the answer's your looking for.

LatitudeNZ 01-24-13 09:19 PM

Hey Nathan, got your message.

Kia ora to everyone else here. Names Eric, from Palmy.
I drive a 91 toyota soarer, image down below.
If your ever down/up my ways, hit me up. It would be nice to meet a fellow CL per.

http://farm9.staticflickr.com/8457/8...fbab11f7_z.jpg
http://farm9.staticflickr.com/8046/8...3789152d_z.jpg

Excuse the 2nd photo, the lip wasnt mounted at that point, was just a test fit to see how it looked.

Evlc36 01-24-13 11:40 PM

Tom from Auckland - 2003 JZS161 Aristo

http://i60.photobucket.com/albums/h3...E6C6C86535.jpg

BCHDAZ 01-24-13 11:59 PM

you painted your wheel already tom? it's looking good.

Evlc36 01-25-13 12:17 AM

Actually, I traded my old wheels on a new set in the colour scheme I wanted - it was much cheaper!

Also got my Cusco sways, front and rear lower chassis brace, and RCAs installed - now just need my 15mm spacer on rear to sort out the weak offset (not going as aggressive as last time though - it was 15mm front, 25mm rear spacers) Centre bore was different on new wheels, so spacer is off getting milled.

Also got some Cusco strut braces and TRD/Figs rear end bushes on the way - should handle pretty sweet soon - just in time for the single turbo :)

BCHDAZ 01-25-13 12:24 AM

looks good without the blacked out tail-lights as well.

good to see you got the handling sorted anyway. what spec's are your wheel's? offsets ect?

Evlc36 01-25-13 12:31 AM

19x9.5, ET32 all round (rear will be ET17 after spacer)

Yeah, I took off the dark film (17% I think?), but I am now running 5% tint film (on headlights and taillights) which just gives it a very nice, subtle smoke, but is not obvious unless you have my car side by side with a car that hasn't had the film applied.

PS, are you a member on ClubAristo?

BCHDAZ 01-25-13 12:33 AM

Way more aggressive than what ill be running..... :) (19x8.5jj +41 R-disk and 19x9.5jj +39 O-disk.)
http://i1229.photobucket.com/albums/...psbd818658.jpg

only a member here.

Evlc36 01-25-13 07:29 PM

Nice, love the VS-XX, when bank acc recovers after single turbo swap am tossing up between a set of genuine BBS LMs, or VS-XXs

BCHDAZ 01-25-13 08:04 PM

DAMN IT!.... why dose everyone think there XX's.:egads:
there Vs-Ms's... really cannot wait to get them on.

if you need a hand finding a nice set of rim's let me know.

Evlc36 01-26-13 12:47 AM

I thought they looked slightly odd and not quite vs-xx ish, but couldn't be bothered searching to confirm, haha, haven't seen that series before!

BCHDAZ 01-26-13 05:41 PM

Can we get some more people on here?

anyone with an IS/Altezza or LS/Celsior?

LatitudeNZ 01-29-13 12:19 AM

Woop woop, new tails!
http://farm9.staticflickr.com/8053/8...eaecfb8ba1.jpg

BCHDAZ 01-29-13 12:30 AM

are those facelift tail's to match your face-lifted bumper?

LatitudeNZ 01-29-13 10:32 AM

Yep sure are. The car came with the 97 front. And i have a front lip for the car, along with a rear lip. Just need to find some sideskirts afer i buy my wheels.


All times are GMT -7. The time now is 04:29 AM.


© 2024 MH Sub I, LLC dba Internet Brands