babbles

Can anyone tell me how to change the map lights on the HS? Thanks!

BULLITT1

6. REMOVE MAP LIGHT ASSEMBLY
Open the holder.Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws.*1
Protective Tape
Rotate the 2 caps as shown in the illustration until the screws are visible.
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws and disconnect the cover.*1
Protective Tape
Remove the 2 screws.
Using a moulding remover, disengage the 2 claws and 2 clips.
Disconnect the connector and remove the map light assembly.
REMOVE MAP LIGHT BULBTurn the 2 map light bulbs and 2 map light sockets in the direction indicated by the arrows in the illustration and remove them as a unit.

waterchng

Like dojomon, I tapped the mirror harness directly with pins also with this 12V to 5V converter: . I'm sure I followed old threads here on how to do this.

babbles

outstanding!! thanks!

Erockz

can I follow this guide to remove the red SOS button light? It stays on all the time and its distracting