zhs

Good day everybody.
One more mod from my side.
This is back camera washer.
splash on the rear window and at the same time on the rear view camera.


Need install this valve


One line to camera and other to glass wiper


Camera nozzle


much better than wiping with a finger 😉


https://youtu.be/I48TWPU_GHI

ObsidianBl

How close are the original washer lines to the camera area? Do we need to relocate the hose or cut longer hose?

By the way, what options are on your GX? I saw the side view camera buttons on the display unit

zhs

Need only cut original tube to glass wiper, install 3 way valve. One line to glass wiper, other line to camera nozzle. Plus approximately 20 cm rubber tube to new nozzle.

According cameras.
My GX is Luxury version. Total 4 cameras.

Acrad

Asked this vendor in Russia if they will sell to US.

https://cleancam.ru/omyvateli-kamery...2013-2967.html





https://www.drive2.ru/l/557271526693404859/

Acrad

I installed the CleanCam from Russia this morning. Easy install if you have ever had the rear panel off before. Camera is held in by a couple screws you just move over to the other mount. The stream can be aimed as well with a small pin. It was initially too low but brought it up and it coats the lens thoroughly. I get a lot of snow & dirt buildup in the winter and renders the camera pretty useless at times so this should help. Everything fit like a glove and the window sprayer still had plenty of fluid to work with on the rear window. I'll adjust further if needed.

Initial shipment got lost so they had to resend.

shmelvin1

It says it is for a 2009 - 2013, will it not work on a 2016?

Acrad

They advertise this one for 2014+

https://cleancam.ru/omyvateli-kamery...19--3108-.html

shmelvin1

Does anyone know how to order it? the order page only lists Russia with payment on delivery

Acrad

I had to reach out to them and they setup a Paypal transaction for me.

shmelvin1

How did you contact them? I tried their online message page and it was rejected each time I hit send

Acrad

I emailed them at mail@cleancam.ru

IIRC... they had to do a request for funds and I paid them via Paypal. Be prepared for a long delivery timeline... it was ordered in early May.

I used English to Russian translation first but wasn't necessary as they responded in English.

shmelvin1

I emailed them Tuesday, they replied on Wednesday and shipped on Thursday.......Now that's customer service Comrade.

Ramacher

iTrader: (1)

How much was it in USD?

shmelvin1

$54.00 all in.

shmelvin1

Got it in the mail yesterday 10 days total...Can't beat that, all the way from Kazan in Mother Russia