Rear Door Table Mod
#16
Super Moderator
Thread Starter
#17
Super Moderator
Thread Starter
#19
Super Moderator
Thread Starter
Vendor just told me just shy of $300 USD shipped to US
#21
#22
Super Moderator
Thread Starter
It does seem to be high quality. I can see a really general utility having this back there just in everyday use. I sent an inquiry off to vendor on weight capacity. I too like that it still allows the use of both doors. I've seen some that cover up.
msgs350: I asked about shipping discounts as well . (Your PM box is full) :-)
msgs350: I asked about shipping discounts as well . (Your PM box is full) :-)
#23
Super Moderator
Thread Starter
Weight rating is 22lbs.
Example: Roughly half the dry weight of a Honda EU2000i generator
"We list the load rating as 10kg. The limitation on the loading is not to do with the cord that holds up the table. The cord 550Lb parachute cord and is rated to over 200kg per cord. The concern is with the plastic screws mounting into the door skin. You will find that 10kg is a fair bit of weight and would be enough to support a camp stove with pot and a couple of six packs."
••I've asked to be invoiced for two of them since shipping was only $30 more for the second one.
msgs350: I'll split the difference with you at $70 for shipping if interested when I get it. I know I can easily sell this on CL if you decide to pass.
EDIT: Actually shipping for each would be around $65/each at current exchange rate. This puts shipped cost around $256 USD/each.
Example: Roughly half the dry weight of a Honda EU2000i generator
"We list the load rating as 10kg. The limitation on the loading is not to do with the cord that holds up the table. The cord 550Lb parachute cord and is rated to over 200kg per cord. The concern is with the plastic screws mounting into the door skin. You will find that 10kg is a fair bit of weight and would be enough to support a camp stove with pot and a couple of six packs."
••I've asked to be invoiced for two of them since shipping was only $30 more for the second one.
msgs350: I'll split the difference with you at $70 for shipping if interested when I get it. I know I can easily sell this on CL if you decide to pass.
EDIT: Actually shipping for each would be around $65/each at current exchange rate. This puts shipped cost around $256 USD/each.
Last edited by Acrad; 04-11-18 at 05:29 PM.
#24
Pole Position
iTrader: (2)
Weight rating is 22lbs.
Example: Roughly half the dry weight of a Honda EU2000i generator
"We list the load rating as 10kg. The limitation on the loading is not to do with the cord that holds up the table. The cord 550Lb parachute cord and is rated to over 200kg per cord. The concern is with the plastic screws mounting into the door skin. You will find that 10kg is a fair bit of weight and would be enough to support a camp stove with pot and a couple of six packs."
••I've asked to be invoiced for two of them since shipping was only $30 more for the second one.
msgs350: I'll split the difference with you at $70 for shipping if interested when I get it. I know I can easily sell this on CL if you decide to pass.
EDIT: Actually shipping for each would be around $65/each at current exchange rate. This puts shipped cost around $256 USD/each.
Example: Roughly half the dry weight of a Honda EU2000i generator
"We list the load rating as 10kg. The limitation on the loading is not to do with the cord that holds up the table. The cord 550Lb parachute cord and is rated to over 200kg per cord. The concern is with the plastic screws mounting into the door skin. You will find that 10kg is a fair bit of weight and would be enough to support a camp stove with pot and a couple of six packs."
••I've asked to be invoiced for two of them since shipping was only $30 more for the second one.
msgs350: I'll split the difference with you at $70 for shipping if interested when I get it. I know I can easily sell this on CL if you decide to pass.
EDIT: Actually shipping for each would be around $65/each at current exchange rate. This puts shipped cost around $256 USD/each.
PM'd you. This would make a great changing table for my son..haha. I like it because it seems like its the easier to clean out of the ones i've seen and i think it looks best. Going to work great for tailgating at Seahawks' Games!
Last edited by msgs350; 04-11-18 at 06:57 PM.
The following users liked this post:
Acrad (04-11-18)
#25
Racer
Looks like they added US shipping option to the price and changed the listing to also fit Lexus GXOR LOL. It's now around $300 shipped to US.
A group buy would be great to save on shipping.
A group buy would be great to save on shipping.
The following users liked this post:
Acrad (04-12-18)
#26
Super Moderator
Thread Starter
I emailed vendor to possibly reach out to Mule Expedition Outfitters about possibly become a US reseller.
The following users liked this post:
bbqsoup (04-12-18)
#27
Racer
I emailed vendor to possibly reach out to Mule Expedition Outfitters about possibly become a US reseller.
Now I'm thinking of getting one too. The last time I was out, I had to make coffee and ramen noodle on the ground LOL
#28
Ramen noodles.. Living the Lexus luxury life chef
The following users liked this post:
bbqsoup (11-04-19)
#29
Racer
#30
front runner makes one for a jeep, i bet there is a way to rig it up in the GX. its 1/3rd the price of the kaon and honestly, looks much better and much better build.
https://www.frontrunneroutfitters.co...able-mk11.html
Consists of:
1 x Table Assembly
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Stainless steel cables
Laminated plywood
Product Dimensions:
Closed Dimensions:
655mm (25.8") L x 361mm (14.2") H x 42mm (1.7") W
Fully Opened Dimensions:
1095mm (43") L x 338mm (13.3") W x 361mm (14.2") H
Weight:
8.3kg (18.3lbs)
Load Rating:
40kg (88.2lbs)
https://www.frontrunneroutfitters.co...able-mk11.html
Consists of:
1 x Table Assembly
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Stainless steel cables
Laminated plywood
Product Dimensions:
Closed Dimensions:
655mm (25.8") L x 361mm (14.2") H x 42mm (1.7") W
Fully Opened Dimensions:
1095mm (43") L x 338mm (13.3") W x 361mm (14.2") H
Weight:
8.3kg (18.3lbs)
Load Rating:
40kg (88.2lbs)
Last edited by leftyguns; 04-25-18 at 08:16 PM. Reason: added pic