When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just bought the switch Acrad recommended and then disassembled it, took out the air suspension/height control buttons and stuck back in my original switch box. My DAC switch is using the 3 way toggle, it just shows on/off since I obviously don't have the correct cover. I hate all the dust that gets in-between the 2 switches, so I didn't want 2 more switches that would start collecting dirt.
So not trusting lazy parts guys, I took your advice and called 2 more dealers. 1 left in the states, more inbound from Japan will arrive in a week or so.
Is Carmarka responding to emails? I sent them two emails 4 -5 days ago and have not heard back. I sent it to info@carmarka.com and tuningru.eim.ae.
I never contacted them. They were very proactive in contacting me. They sent the pic of the switch next to the bag that I posted once they received the part and shipped on to me.
Dang. You stole my idea.... Looks good and makes sense. The top two switches don't make sense if you don't have those features.
Haha, sorry. Was a bit worried about tearing up the 400 switch box, but yeah, just popped the extra buttons off. I can't confirm the CC works because I've not done the Calibration yet but 4lo was working no problem.
Did the switches snap/break? Or are they just rough and unfinished on the bottom side? The picture looks like they broke off.
That white stuff is just some type of lube to keep the buttons from squeaking as far as I can tell. The toggle switches are just held on by the sides and pop off easily (you can see the little holes where mating part is connected). The blank button and on/off push button were really hard to get off, I used that tiny screw driver you see in the picture, stuck it through the bottom side of the button and hit it very hard against my work bench and it popped it off, its on there pretty good and will take some force, just be careful and make sure you have a concept of how its on there before trying my ape method.
06-22-18, 11:16 PM
Looks good and makes sense. The top two switches don't make sense if you don't have those features.
