When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If that's the case, then is it possible that some of the Toyota dealers will have this part as well?
Though this one might have no stock now(not sure), it had something in stock once cuz otherwise, it wouldn't post it on the website.
If that's the case, then is it possible that some of the Toyota dealers will have this part as well?
Though this one might have no stock now(not sure), it had something in stock once cuz otherwise, it wouldn't post it on the website.
I think most of the sites are using the same or similar central distributors. They are going with what the distro has on the catalog. Only after the order was put in that the dealer contact them and found out part is no longer available. I think this is the case with some of the dealers in the south/east.
I might be off a year or so but looks like crawl control was 3 speeds for '08-'14 LC and '08-'13 LX 570 and then upgraded to the 5 speeds that the GX is capable of.
EDIT: I've seen some posts that '13 LC went to 5 speed instead of '14
@bbqsoup, I'm having second thoughts and concerns because mine is a Base model, not a Prem like Acrad. I'm wondering if mine will have the same wiring as his and therefore this mod may not be applicable to my GX. I'm betting they have two different wiring harnesses - 1 for the base & 1 for Lux/Prem.
If I start going thru this process only to find that I am right, I'll contact you if you have no luck procuring one. All of this of course is predicated on my acquisition of the console Combi-switch.
@Cicio - I checked with the monster, I was trying to get it at a cheaper price, so you may have luck obtaining one through them.
"Hello, no unfortunatly our prices are already at the lowest possible and we can't go any lower than what we have them listed for.Thank you."
EDIT: Would any '10-'13 Base or '14+ Base/Premium owners be up to looking at their wiring to confirm their wiring status on switch and driver support?
I can't guarantee anything of course but odds are high if on your driver support computer you have the Black / Green / Blue wires in upper left area. The wires goto the console switch.
These are the CC wires used in the schematic. This picture was taken removing soft trim above the glove box & below wood trim... glove box wasn't removed for picture. I removed the padding piece next to passengers left leg but you might be able to do it without removal as well.
EDIT: IIRC... on the Prado's that didn't have these wires they were still able to run wires and get it to work. Of course that takes the project in a different direction from relatively plug and play.
@bbqsoup, I'm having second thoughts and concerns because mine is a Base model, not a Prem like Acrad. I'm wondering if mine will have the same wiring as his and therefore this mod may not be applicable to my GX. I'm betting they have two different wiring harnesses - 1 for the base & 1 for Lux/Prem.
If I start going thru this process only to find that I am right, I'll contact you if you have no luck procuring one. All of this of course is predicated on my acquisition of the console Combi-switch.
@Cicio - I checked with the monster, I was trying to get it at a cheaper price, so you may have luck obtaining one through them.
"Hello, no unfortunatly our prices are already at the lowest possible and we can't go any lower than what we have them listed for.Thank you."
They did not say that it was out-of-stock.
I am second as Acrad has comment, the chances are those wires are all there regardless trim level. From my reading one GX electronic components and overall functionalities, The Drive Support Unit handles wide range of function and communication related to most basic drivetrain function requirements. So for base model, you will be missing EUCs such as suspension control, third row power folding control, and other luxury stuffs. Another thing that provide strong evidence from the parts list, GX seems has base body wire harnesses and engine bay wire harness, there is no trim level differences. I bet that you will find the front camera and Distance control unit wire harness are there as well.
Some bad news. I got the confirmation from Lexus of Kendall that 60080 is not the same as 60070. He said it doesn’t have have the SPEED and ON/OFF button.
Some bad news. I got the confirmation from Lexus of Kendall that 60080 is not the same as 60070. He said it doesn’t have have the SPEED and ON/OFF button.
A couple days back I made an inquiry with Megazip again about ordering another one as a ticket against my previous order. I got the initial response about talking to vendor and a response in 1-2 days. Still awaiting to hear back from them.
Try looking for some different part numbers and look at the picture they posted. Sometimes they post wrong parts number. The one I bought was post as 60100. Just remember to confirm with the seller before placing the order.
Did salvage yard send you a tracking number for the switch?
03-01-18, 04:18 PM
