When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
. Chose this one due to the great reviews on Amazon and dashcamtalk forums. Many thanks due to tecman https://www.clublexus.com/forums/gx-2nd-gen-2010-present/793431-dyi-dashcam-radar-detector-fusebox-wiring.html#post9138309 and katzer011 https://www.clublexus.com/forums/gx-2nd-gen-2010-present/856911-gx-dash-cam.html for the write ups.
Yesterday, I installed a K&N air filter, and picked up the OEM crossbars from a local dealership. They were easy to install, but it was 118 yesterday and I wished more than anything that I had a garage. Not that lucky though, at least not yet.
Yesterday, I installed a K&N air filter, and picked up the OEM crossbars from a local dealership. They were easy to install, but it was 118 yesterday and I wished more than anything that I had a garage. Not that lucky though, at least not yet.
Need some help is there any trick to remove the bulbs from the driver area dome, I tried using a flat head screw driver but it won't come off. There's not enough clearance and I'm 150lbs so I don't think I have fat fingers 😂 Was able to do the rest but the front one. Thanks
Need some help is there any trick to remove the bulbs from the driver area dome, I tried using a flat head screw driver but it won't come off. There's not enough clearance and I'm 150lbs so I don't think I have fat fingers 😂 Was able to do the rest but the front one. Thanks
Do you mean the map domes and also the covers or the bulb extraction itself? If covers pry on the "sides" toward the windshield. Cover should drop straight down from this part. Don't pry cover on areas closest to you. This stands a great chance of breaking something. I pried on red dot area and they almost just fall out.
Do you mean the map domes and also the covers or the bulb extraction itself? If covers pry on the "sides" toward the windshield. Cover should drop straight down from this part. Don't pry cover on areas closest to you. This stands a great chance of breaking something. I pried on red dot area and they almost just fall out.
Originally Posted by bbqsoup
I used tape and wrapped around the bulb and pulled it out.
I took the cover out no problem just the bulb won't come out. Wrap electric tape and use a tool good idea.
06-21-17, 03:34 PM
