"What did you do to your..." thread?
#166
Racer
I always get a laugh out of the swinging nuts that Chevy and Ford guys hanging on their hitch.
The following users liked this post:
bbqsoup (03-04-21)
#169
Finally got around to installing the Street Guardian dash cam
https://www.amazon.com/Street-Guardian-SG9665GC-microSD-Supercapacitor/dp/B00U0OJMYG/ref=sr_1_1?ie=UTF8&qid=1498180719&sr=8-1&keywords=street+guardian
. Chose this one due to the great reviews on Amazon and dashcamtalk forums. Many thanks due to tecman https://www.clublexus.com/forums/gx-2nd-gen-2010-present/793431-dyi-dashcam-radar-detector-fusebox-wiring.html#post9138309 and katzer011 https://www.clublexus.com/forums/gx-2nd-gen-2010-present/856911-gx-dash-cam.html for the write ups.
#170
Driver School Candidate
Yesterday, I installed a K&N air filter, and picked up the OEM crossbars from a local dealership. They were easy to install, but it was 118 yesterday and I wished more than anything that I had a garage. Not that lucky though, at least not yet.
#172
https://www.clublexus.com/forums/gx-...-gx-460-a.html
#173
Need some help is there any trick to remove the bulbs from the driver area dome, I tried using a flat head screw driver but it won't come off. There's not enough clearance and I'm 150lbs so I don't think I have fat fingers 😂 Was able to do the rest but the front one. Thanks
Last edited by Dallasguy1; 06-24-17 at 10:56 PM.
#174
Super Moderator
Need some help is there any trick to remove the bulbs from the driver area dome, I tried using a flat head screw driver but it won't come off. There's not enough clearance and I'm 150lbs so I don't think I have fat fingers 😂 Was able to do the rest but the front one. Thanks
#175
Racer
I used tape and wrapped around the bulb and pulled it out.
#176
Originally Posted by Acrad35751
Do you mean the map domes and also the covers or the bulb extraction itself? If covers pry on the "sides" toward the windshield. Cover should drop straight down from this part. Don't pry cover on areas closest to you. This stands a great chance of breaking something. I pried on red dot area and they almost just fall out.
Originally Posted by bbqsoup
I used tape and wrapped around the bulb and pulled it out.
#177
Super Moderator
Tape sounds like a good tip... I used a tool on one side and finger to gently rock bulb a little bit and then they popped out.
#179