Wheel Fitment Question - 2014 GX460
03-10-14, 08:31 AM
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2010
Location: TX
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Wheel Fitment Question - 2014 GX460
Hi,
My dad recently purchased a 2014 GX and has asked me to source wheels for him. I'm in the process of ordering a set of Forgeline's and was wondering if anyone has put aftermarket wheels on a 2nd gen GX and can provide fitment for it. Plan would be a set of 20" x 9" with a 0-25mm offset. I'm not looking for a huge lip, just a fitment that keeps the rim flush with the fenders.
Any advice would be greatly appreciated!
Michael
My dad recently purchased a 2014 GX and has asked me to source wheels for him. I'm in the process of ordering a set of Forgeline's and was wondering if anyone has put aftermarket wheels on a 2nd gen GX and can provide fitment for it. Plan would be a set of 20" x 9" with a 0-25mm offset. I'm not looking for a huge lip, just a fitment that keeps the rim flush with the fenders.
Any advice would be greatly appreciated!
Michael
03-10-14, 07:39 PM
#2
You are asking a rare question here (actually I think never) and I think I am the only owner that has a custom set up.
DUB 22X9 wheels
Any reputable company should be able to inform you if the wheels/tires will meet the required standards, they may not know due to they have never built wheels for the GX.
DUB 22X9 wheels
Any reputable company should be able to inform you if the wheels/tires will meet the required standards, they may not know due to they have never built wheels for the GX.
03-10-14, 07:42 PM
#3
You are asking a rare question here (actually I think never) and I think I am the only owner that has a custom set up.
DUB 22X9 wheels
Any reputable company should be able to inform you if the wheels/tires will meet the required standards, they may not know due to they have never built wheels for the GX.
DUB 22X9 wheels
Any reputable company should be able to inform you if the wheels/tires will meet the required standards, they may not know due to they have never built wheels for the GX.
03-10-14, 07:54 PM
#4
I paid a custom shop to handle my fit. All I can tell you is what is on my receipt and they demanded I stay spec.
057-1000
22X9 DUB X58/6
If you can figure out what the above numbers are, if not I would be happy to find out for you.
057-1000
22X9 DUB X58/6
If you can figure out what the above numbers are, if not I would be happy to find out for you.
03-10-14, 08:02 PM
#5
Racer
its a rare question and theres not much choice unfortunately. I would stick with stock rims. I have always said here, the 4th gen Limited 4R 6 spoke silver rims are the best looking rims. I like the current luxury rims too.
keep in mind, going up on the rims and tires puts stress on the joints and suspension, and they could wear out faster.
keep in mind, going up on the rims and tires puts stress on the joints and suspension, and they could wear out faster.
03-10-14, 08:12 PM
#6
its a rare question and theres not much choice unfortunately. I would stick with stock rims. I have always said here, the 4th gen Limited 4R 6 spoke silver rims are the best looking rims. I like the current luxury rims too.
keep in mind, going up on the rims and tires puts stress on the joints and suspension, and they could wear out faster.
keep in mind, going up on the rims and tires puts stress on the joints and suspension, and they could wear out faster.
Last edited by tecman; 03-10-14 at 08:20 PM.
03-12-14, 07:20 AM
#7
Driver School Candidate
Thread Starter
Join Date: Jul 2010
Location: TX
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
My guess would be that your wheel is a +57mm offset. On a 9" wide wheel, this would give you a 2.2" lip.
I understand this is not a common question amongst GX owners, but it likely will be after I get done. I can't get excited over any of the factory wheel options for the GX and a high quality forged wheel with the right fitment shouldn't hurt anything.
My friend is a Forgeline distributor and this is the wheel we are going with. It will have a brushed center with a polished lip. It's the only wheel Forgeline has in a 6x5.5 bolt pattern.
Michael
Trending Topics
04-06-14, 01:50 AM
#9
Driver School Candidate
Thread Starter
Join Date: Jul 2010
Location: TX
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Forgeline's have been ordered through Tony at DV8 Motoring (www.dv8motoring.com). We ordered the wheels with a high gloss brushed center and cleared polished lip. Here's a few pictures of what the wheels should look like in the finish we ordered....
Michael
Michael
04-06-14, 07:41 PM
#11
Lead Lap
Those Forgeline's are awesome, at least on Vipers. I had 19" Forgeline VR1's on my old Viper before they discontinued them. They looked just like the GA3R wheels in the picture but were 1 piece lightweight wheels made specifically for the Viper.
04-07-14, 02:20 AM
#12
Driver School Candidate
Thread Starter
Join Date: Jul 2010
Location: TX
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
04-07-14, 02:22 AM
#13
Driver School Candidate
Thread Starter
Join Date: Jul 2010
Location: TX
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I'll be sure to post pictures of the finished product!
Thread
Thread Starter
Forum
Replies
Last Post
95ES-300
LS - 1st and 2nd Gen (1990-2000)
4
08-01-10 06:36 PM
