ClubLexus - Lexus Forum Discussion

ClubLexus - Lexus Forum Discussion (https://www.clublexus.com/forums/)
-   GX - 2nd Gen (2010-2023) (https://www.clublexus.com/forums/gx-2nd-gen-2010-2023-219/)
-   -   Has anyone tried to change the footwell and doorhandle lights? (https://www.clublexus.com/forums/gx-2nd-gen-2010-2023/562837-has-anyone-tried-to-change-the-footwell-and-doorhandle-lights.html)

jaleels 04-03-11 05:19 PM

Has anyone tried to change the footwell and doorhandle lights?
 
3 Attachment(s)
The GX 460 has weak yellow footwell lights that do not illuminate well. I spoke to Eli at V-leds and he said that he had never seen the type of bulb that the GX 460 uses for footwell lights. I would like to change the footwell lights to brighter L.E.D. lights. Does anyone know what type of L.E.D. lights we can use to replace the footwell lights? I have included some pictures of the footwell bulb below. Also, has anyone tried to replace the interior door handle bulbs.

Attachment 205296
Attachment 205297
Attachment 205298

jaleels 04-16-11 06:26 PM

I also noticed that the footwell lights dim when the car is shifted from neutral.

jaleels 04-26-11 01:58 PM

The glove box has the same type of light. Does anyone know how to replace these lights for brighter L.E.D. lights?

BigGreen13 07-10-16 02:55 PM

This is a loooooooooong hiatus, but bump. I want to change these things in my 2016.

CV460 07-10-16 04:54 PM

Lights
 
Me too I notice how dim they are and want to change mine on my 2016 too:sad:

Pit8ull 06-13-18 07:47 PM

Has anyone come up with anything on this bulb style yet?

I haven't been able to find anything online as of yet.

Otherone 06-15-18 01:29 PM

subscribed. Interested too.

omgitsroy 06-16-18 02:36 PM

I hate it also

tecman 06-16-18 07:43 PM

Is this what you are looking to do? I did this an hour ago. I can post details later.
https://www.youtube.com/watch?v=qFSq...ature=youtu.be

Otherone 06-29-18 01:27 PM


Originally Posted by tecman (Post 10226510)
Is this what you are looking to do? I did this an hour ago. I can post details later.
https://www.youtube.com/watch?v=qFSq...ature=youtu.be

That's exactly what I want! What did you use to swap them out?

Thanks,

omgitsroy 06-29-18 02:37 PM


Originally Posted by tecman (Post 10226510)
Is this what you are looking to do? I did this an hour ago. I can post details later.
https://www.youtube.com/watch?v=qFSq...ature=youtu.be

“later” ..... patiently waiting

tecman 06-29-18 08:02 PM


A little more involved than expected. With the reply here I went to my garage to play again. If you are looking for a plug and play easy option I can’t help you as this led is odd so I modified. I will work on details this week.
__________________


https://cimg2.ibsrv.net/gimg/www.clu...c93690945.jpeg
https://cimg3.ibsrv.net/gimg/www.clu...905a93358.jpeg
https://cimg4.ibsrv.net/gimg/www.clu...b80997732.jpeg

leftyguns 06-30-18 08:30 AM

dumb question. cant we just find any LED then splice it in to the existing wires?

tecman 06-30-18 12:26 PM

A cheap mod and easy enough to do.

https://cimg6.ibsrv.net/gimg/www.clu...ba071cce8b.jpg

Originally started with a door light from a panel I have off.
https://cimg2.ibsrv.net/gimg/www.clu...3002c3b632.jpg

Bought some light sockets that I had some LEDs for (interior lights).
https://cimg9.ibsrv.net/gimg/www.clu...cf873fc60f.jpg

Is this a temperature sensor on the passenger side?
https://cimg1.ibsrv.net/gimg/www.clu...4572101401.jpg

Passenger side was easy to fit because I could drop the panel.
https://cimg0.ibsrv.net/gimg/www.clu...172e35a7c6.jpg

Cleared off the plastic housing for the original LED.
https://cimg6.ibsrv.net/gimg/www.clu...672e3e38ae.jpg

Went with a 9/16 hole.
https://cimg9.ibsrv.net/gimg/www.clu...b210e1ad3e.jpg

Passenger side.
https://cimg9.ibsrv.net/gimg/www.clu...05a74da584.jpg

Passenger side
https://cimg9.ibsrv.net/gimg/www.clu...a4e0d85550.jpg

The drivers side is built into the floor vent and I didn't see an easy way to remove it.
https://cimg1.ibsrv.net/gimg/www.clu...538aa27812.jpg

To push the socket in from the rear there are 2 open sides so I left a lip on the socket to keep it in place.
https://cimg0.ibsrv.net/gimg/www.clu...c494bd2761.jpg

9/16 hole again for driver side.
https://cimg5.ibsrv.net/gimg/www.clu...01ce083e7f.jpg

Snug fit.
https://cimg3.ibsrv.net/gimg/www.clu...4908d96fa6.jpg

Drivers side.
https://cimg4.ibsrv.net/gimg/www.clu...1172a37fa6.jpg

Passenger side.
https://cimg7.ibsrv.net/gimg/www.clu...5269f272a6.jpg

In neutral.

Wadle5 07-03-18 07:11 AM

Looking at this it is looking like modifications to these vehicles are a little more time consuming and not a lot of aftermarket support?


All times are GMT -7. The time now is 08:24 AM.


© 2024 MH Sub I, LLC dba Internet Brands