ClubLexus - Lexus Forum Discussion

GX - 1st Gen (2004-2009) Discussion topics related to the 2003 -2009 GX470 models

Gauge stepper motor install help.

Thread Tools
 
Search this Thread
 
Old 03-19-19, 12:23 PM
  #1  
Thunder92
Driver School Candidate
Thread Starter
 
Thunder92's Avatar
 
Join Date: Jan 2019
Location: NM
Posts: 26
Likes: 0
Received 1 Like on 1 Post
Default Gauge stepper motor install help.
Have the stepper Motors here now and I'm trying to install them. I assume the circuit board has to come off the back of the cluster but it doesn't seem to want to come off. There was one screw in the middle and a bunch of tabs around the edges holding it on I don't see anything else. Maybe the dials need to come off the speedo somehow? Any advice?
Last edited by Thunder92; 03-19-19 at 02:10 PM.
Thunder92 is offline  
Reply Like
Old 03-19-19, 07:02 PM
  #2  
chiph9
Pole Position
 
chiph9's Avatar
 
Join Date: Feb 2014
Location: NC
Posts: 3,372
Received 728 Likes on 596 Posts
Default
Yes you would need to remove the pointers. Be careful doing this.

Chip H.
chiph9 is offline  
Reply Like
Old 03-19-19, 07:16 PM
  #3  
Thunder92
Driver School Candidate
Thread Starter
 
Thunder92's Avatar
 
Join Date: Jan 2019
Location: NM
Posts: 26
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by chiph9
Yes you would need to remove the pointers. Be careful doing this.

Chip H.

Ok thanks. They just pop off? I got the speedo cover off and now a green clip. The dumb speedo cover very fragile and did barely crack 😪
Last edited by Thunder92; 03-19-19 at 07:21 PM.
Thunder92 is offline  
Reply Like
Old 03-19-19, 07:24 PM
  #4  
Thunder92
Driver School Candidate
Thread Starter
 
Thunder92's Avatar
 
Join Date: Jan 2019
Location: NM
Posts: 26
Likes: 0
Received 1 Like on 1 Post
Default Nevermind
You have to pull the green tabs hard. Fun.
Thunder92 is offline  
Reply Like
Old 03-19-19, 07:38 PM
  #5  
Thunder92
Driver School Candidate
Thread Starter
 
Thunder92's Avatar
 
Join Date: Jan 2019
Location: NM
Posts: 26
Likes: 0
Received 1 Like on 1 Post
Default Done
Ok I did it.
Thunder92 is offline  
Reply Like
Old 03-20-19, 10:39 AM
  #6  
TaninAuto
Sponsor
 
TaninAuto's Avatar
 
Join Date: May 2012
Location: WI
Posts: 1,057
Received 110 Likes on 80 Posts
Default
Yeah those are broken now. You will need to super glue them back together.
__________________
TANIN AUTO ELECTRONIX
262-456-4147
contact@taninauto.com
www.taninautoelectronix.com

TaninAuto is offline  
Reply Like
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
speedo problems
nstory13
SC- 1st Gen (1992-2000)
2
01-26-14 09:20 AM
gauge cluster needles...
socalturbo
SC- 1st Gen (1992-2000)
4
01-02-10 12:27 PM
wiring help...
socalturbo
Performance & Maintenance
2
12-27-09 09:21 PM
Back to Subforum
GX - 1st Gen (2004-2009)
View Next Unread
07 White GX on 20" WT4's and 275/55 AT




Advanced Search
Quick Reply: Gauge stepper motor install help.


Reply Closed Thread Share
Forum Jump

All times are GMT -7. The time now is 05:47 AM.