SAIS bypass kit - NY state inspection
#16
^ The install is through the wheel wells and is not that bad. Remove the wheels for better access. I used socket/ratchet and ratcheting wrenches. You’ll be turning only a few degrees at a time but patience will pay off.
Driver side
Plate pushed in
Passenger side
Just unfasten the 2 nuts enough to push plate in
Ratchet/socket 10mm iirc
Wire hidden neatly
Driver side
Plate pushed in
Passenger side
Just unfasten the 2 nuts enough to push plate in
Ratchet/socket 10mm iirc
Wire hidden neatly
#17
Driver School Candidate
Thread Starter
@aljodoro ...... i did not, as i didn't really feel like putting up on stands. i also didn't feel like if i was laying on my back my arms would be long enough to get up there. although i considered it. PB blaster soaking over night is a must.
Thread
Thread Starter
Forum
Replies
Last Post