GX - 1st Gen (2004-2009) Discussion topics related to the 2003 -2009 GX470 models

Front Skid Plate

Thread Tools
 
Search this Thread
 
Old 05-27-17, 07:54 AM
  #1  
jonesmw10
Rookie
Thread Starter
 
jonesmw10's Avatar
 
Join Date: Mar 2017
Location: CO
Posts: 60
Likes: 0
Received 6 Likes on 6 Posts
Default Front Skid Plate

Anyone know where I can get a front skid plate for my GX? They seem to be almost impossible to find. Do 4th gen 4Runner skids fit our GX?

Last edited by jonesmw10; 05-27-17 at 07:58 AM.
Old 05-28-17, 06:39 PM
  #2  
archangelp
Driver School Candidate
 
archangelp's Avatar
 
Join Date: May 2017
Location: TX
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default

I have the same question...I have an '04.
Old 05-29-17, 04:44 AM
  #3  
burny
Lexus Champion
 
burny's Avatar
 
Join Date: Dec 2008
Location: VA
Posts: 1,714
Received 18 Likes on 17 Posts
Default

RCI out of Fort Collins, CO
Old 05-31-17, 07:33 AM
  #4  
andyaspen
Driver School Candidate
 
andyaspen's Avatar
 
Join Date: Dec 2016
Location: CO
Posts: 11
Likes: 0
Received 1 Like on 1 Post
Default

RCI Metal Works as pointed out by burny. Just replaced the front plate on my '04.
Old 05-31-17, 07:45 AM
  #5  
jasanders
Driver School Candidate
 
jasanders's Avatar
 
Join Date: Mar 2017
Location: LA
Posts: 46
Received 3 Likes on 3 Posts
Default

http://toyteclifts.3dcartstores.com/...e-_p_1327.html

Toytec sells the RCI skid plates
Old 05-31-17, 07:58 AM
  #6  
IanB2
Pole Position
 
IanB2's Avatar
 
Join Date: Feb 2013
Location: WPG, MB
Posts: 2,303
Received 520 Likes on 433 Posts
Default

Any chance these allow for the oil filter to be changed without removing the skid plate?
Old 05-31-17, 09:46 AM
  #7  
jasanders
Driver School Candidate
 
jasanders's Avatar
 
Join Date: Mar 2017
Location: LA
Posts: 46
Received 3 Likes on 3 Posts
Default

Originally Posted by IanB2
Any chance these allow for the oil filter to be changed without removing the skid plate?
From the looks of it......it does not appear that you would be able to change the filter without removing the skid plate.
Old 05-31-17, 11:54 AM
  #8  
IanB2
Pole Position
 
IanB2's Avatar
 
Join Date: Feb 2013
Location: WPG, MB
Posts: 2,303
Received 520 Likes on 433 Posts
Default

Originally Posted by jasanders
From the looks of it......it does not appear that you would be able to change the filter without removing the skid plate.
Well ****. Our GX gets driven offroad about 0% of the time, but I'd buy an aftermarket skid plate if it allowed for the oil filter to be changed with it in place.
Old 05-31-17, 11:55 AM
  #9  
jasanders
Driver School Candidate
 
jasanders's Avatar
 
Join Date: Mar 2017
Location: LA
Posts: 46
Received 3 Likes on 3 Posts
Default

Originally Posted by IanB2
Well ****. Our GX gets driven offroad about 0% of the time, but I'd buy an aftermarket skid plate if it allowed for the oil filter to be changed with it in place.
Get someone to measure it out and cut a hole for you.
The following users liked this post:
IanB2 (06-01-17)
Old 06-01-17, 10:12 AM
  #10  
LoneHiker
Pit Crew
 
LoneHiker's Avatar
 
Join Date: Feb 2016
Location: CO
Posts: 191
Likes: 0
Received 25 Likes on 23 Posts
Default

I change my filter without removing the stock skid plate. You just need one of these and some ratchet extensions:
https://shop.advanceautoparts.com/p/...earchTerm=73mm

If you're paranoid about catching every little drop of oil, a little creativity might be required. I removed the idiotic drain plate, that thing weighs at least 10 pounds and does nothing except get in the way. Then just put a pan underneath wherever the oil starts dripping. You might be left with a couple of drops worth of oil on the skid plate, but if you care about that, you probably have bigger issues.
The following users liked this post:
IanB2 (06-01-17)
Old 06-01-17, 10:21 AM
  #11  
jonesmw10
Rookie
Thread Starter
 
jonesmw10's Avatar
 
Join Date: Mar 2017
Location: CO
Posts: 60
Likes: 0
Received 6 Likes on 6 Posts
Default

Originally Posted by LoneHiker
You might be left with a couple of drops worth of oil on the skid plate, but if you care about that, you probably have bigger issues.
Think of it as a cheap undercoating

I'll probably end up going with RCI. It'll be the same price as ordering one through Lexus but look a lot nicer
Old 06-01-17, 10:59 AM
  #12  
IanB2
Pole Position
 
IanB2's Avatar
 
Join Date: Feb 2013
Location: WPG, MB
Posts: 2,303
Received 520 Likes on 433 Posts
Default

Originally Posted by LoneHiker
I change my filter without removing the stock skid plate. You just need one of these and some ratchet extensions:
https://shop.advanceautoparts.com/p/...earchTerm=73mm

If you're paranoid about catching every little drop of oil, a little creativity might be required. I removed the idiotic drain plate, that thing weighs at least 10 pounds and does nothing except get in the way. Then just put a pan underneath wherever the oil starts dripping. You might be left with a couple of drops worth of oil on the skid plate, but if you care about that, you probably have bigger issues.
That's interesting, I'll have to take a closer look, didn't think there was room to pull that off with the skid in place!

My E55 "mark's it's territory", so I don't get real hung up on some drips hitting the ground, lol.
Old 06-01-17, 08:23 PM
  #13  
co4wheel
Pole Position
 
co4wheel's Avatar
 
Join Date: Dec 2015
Location: Colorado
Posts: 294
Likes: 0
Received 3 Likes on 2 Posts
Default

Originally Posted by jonesmw10
Anyone know where I can get a front skid plate for my GX? They seem to be almost impossible to find. Do 4th gen 4Runner skids fit our GX?
I have one.
Old 06-01-17, 08:28 PM
  #14  
jonesmw10
Rookie
Thread Starter
 
jonesmw10's Avatar
 
Join Date: Mar 2017
Location: CO
Posts: 60
Likes: 0
Received 6 Likes on 6 Posts
Default

Originally Posted by co4wheel
I have one.

Would you be willing to ship? Maybe send me a PM and we can chat about it? Thanks!
Old 06-01-17, 08:50 PM
  #15  
co4wheel
Pole Position
 
co4wheel's Avatar
 
Join Date: Dec 2015
Location: Colorado
Posts: 294
Likes: 0
Received 3 Likes on 2 Posts
Default

I am in Colorado Springs


Quick Reply: Front Skid Plate



All times are GMT -7. The time now is 07:35 AM.