Rake?
#1
Pole Position
Thread Starter
Rake?
Anyone know off the top of their head what the rake is on our vehicles? The lift kit I ordered came with a half inch spacer to use (if desired) on vehicles with a rake.
Don't want to put it on only to find it lifts the front too much.
Thanks
Cliff
Don't want to put it on only to find it lifts the front too much.
Thanks
Cliff
#2
I did a 4 1/2" lift on mine in the front and 3 in the rear. My measurements prior to the lift were around 1 1/2" difference front to rear. Now it's pretty much level. Hope this helps. Good luck with your project.
#3
Pole Position
Thread Starter
I don't think I've seen pics of your ride. Do you have any you could post?
Trending Topics
#9
Tires are Goodyear 285-70-17. Yes I am running wheel spacers. If I remember correctly they are 1.25". They came from spider trax. The front lift is OME springs with a spacer on top of the strut. For the rear I machined my own 2.5" spacers that sit under the air bags. My final ride height was adjusted by tweaking the height sensors. My air ride and adjustable suspension all still function as intended. A 1" diff drop and sway bar relocation kit were also installed. The majority of the parts I used came from toytec. When the weather is a little nicer out I'll have to take some current pictures. The rear end sits about 1.5" higher now and I have installed centre caps on the wheels.
Thread
Thread Starter
Forum
Replies
Last Post
Shmee
LS - 1st and 2nd Gen (1990-2000)
20
10-16-13 05:49 PM