IOBD2 Wifi Wireless OBD2 Scanner for Iphone
07-22-13, 07:39 PM
#1
Rookie
Thread Starter
Join Date: Jun 2012
Location: BC
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
IOBD2 Wifi Wireless OBD2 Scanner for Iphone
Hello
Has anyone tried this one or similar on GX?
Looks good to me and want to try, just want to hear any smart thoughts from real experience
thanks
Has anyone tried this one or similar on GX?
Looks good to me and want to try, just want to hear any smart thoughts from real experience
thanks
07-23-13, 07:07 AM
#2
Pole Position
Torque on Andriod is excellent, and really cheap. Iphone seems to have bluetooth locked down for peripherals like this, and have to use wifi instead, which is really too bad. I haven't used this one, but I'm looking for a good OBD2 adapter and software package as well. I'll be watching this thread for ideas.
07-24-13, 12:21 PM
#4
Pole Position
07-25-13, 09:56 AM
#5
Rookie
Thread Starter
Join Date: Jun 2012
Location: BC
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Torque on Andriod is excellent, and really cheap. Iphone seems to have bluetooth locked down for peripherals like this, and have to use wifi instead, which is really too bad. I haven't used this one, but I'm looking for a good OBD2 adapter and software package as well. I'll be watching this thread for ideas.
http://www.freenew.net/android/torqu...-car/92910.htm
07-26-13, 06:52 AM
#6
Pole Position
I'm looking for one of these setups that will allow my to scan & clear CEL's, as well as monitor various sensor signals, but nothing I've looked at that works with iphone seems to do this. The idea is to be able to set it up as a tranny temp gauge when towing, and that kind of thing. Any ideas? Does this kiwi software accomplish this?
07-29-13, 06:46 AM
#7
Pole Position
Kiwi is just the adpater from wifi or BT to OBDII. TorquePro for android does exactly what you want, with custom gui and all, so you can set you own gauge cluster. if you can find a Motorola Zoom for cheap that would work awesom for your needs. cool thing about Torque is it allows you to configure custom OBDII codes (those codes that are not readly known, etc).
or, you can just buy ScanGauge-II if all you need is simple read-outs of sensors that can be seen on the canBus, etc.
or, you can just buy ScanGauge-II if all you need is simple read-outs of sensors that can be seen on the canBus, etc.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
